Termostat merupakan alat pengendali switching (memutuskan dan menyambungkan ) arus listrik
pada saat terjadi perubahan suhu di lingkungan sekitarnya. Termostat seringkali digunakan sebagai
alat penstabil/pengatur suhu. Termostat dapat dimanfaatkan sebagai kontroler pemanas dengan
fitur pemanasan atau pendinginan (membuang panas).
Diagram penyambungan :
Cara Setting Thermostat Digital yang Benar
1. Thermostat digital terdapat beberapa merek yang bisa anda pilih. Namun pada pembahasan
ini akan dijabarkan cara setting thermostat digital W3001.
2. Untuk memasangnya Anda dapat mengikuti langkah-langkah di bawah ini:
3. Pertama, sambungkan terlebih dahulu kabel thermostat digital W3001.
4. Jika semua kabel tersambung, langkah berikutnya adalah mengatur suhu sesuai kebutuhan.
5. Tekan dan tahan tombol up pada thermostat hingga layar berkedip.
6. Atur suhu hingga di posisi 38 derajat.
7. Selanjutnya mengatur suhu stop dengan cara menekan sekaligus tahan tombol down hingga
layar berkedip.
8. Untuk suhu terendah Anda bisa mengaturnya menjadi 36 atau 37,5 derajat.
9. Thermostat digital sudah siap untuk Anda gunakan pada peternakan ayam.
10. Perbedaan Thermostat Digital dengan Thermostat Kapsul
11. Mesin penetas telur juga ada yang berbentuk kapsul. Fungsi thermostat ini dengan
thermostat digital sama saja.
XH-3001 Operating instruction
Operating instruction:
(1) Set startup temperature:
Press once the up button, display the startup temperature; long press about 3 seconds, startup
temperature number will flash, you can use the up/down button to set the temperature you need.
(2) Set stopping temperature:
Press once the down button, display the stopping temperature; long press about 3 seconds, stopping
temperature number will flash you can use the up/down button to Test probe set the temperature
you need.
(3) How to recover the factory setting?
When power on, press the up and down button at the same time, after digital tube display "888"
and turn to testing temperature, the factory can be recovered.
Heating Mode Operations :
Setting point: Startup temperature < stopping temperature (The program judge the working mode is
heating mode automatically)
Setting method:
1. Long press the up button until the startup temperature flashing, use up and down button to
set the startup temperature.
2. Long press the down button until the stopping temperature flashing, use up and down
button to set the stopping temperature.
Use case:
1. Controlling water heater, stop heating when temperature is up to 65°C, start heating when
temperature is down to 50°C, How to set?
2. Make sure the working mode is heating mode, startup temperature< stopping temperature.
3. Long press the up button until the startup temperature flashing, use the up and down button
to set the startup temperature is 50°C.
4. Long press the up button until the stopping temperature flashing, use the up and down
button to set the stopping temperature is 65°C, setting finish!