Abstract
Photovoltaic cells provide an additional method of acquiring energy, converting
sunlight directly into electricity through the use of semiconductors. Effective
photovoltaic implementation is reviewed, focusing on semiconductor
properties and overall photovoltaic system configuration.
Photovoltaic cell memberikan sebuah metoda tambahan dalam memperoleh energi,
konversi sinar matahari langsung menjadi listrik melewati penggunaan dari bahan
semikonduktor. Penggunaan photovoltaic yang efektif akan diulas, dan focus
terhadap bahan semikonduktor dan seluruh sistem konfigurasi photovoltaic.
I. INTRODUCTION
Solar Cells (Photovoltaic Cells) are devices that convert solar energy to electrical
energy using the field of technology known as photovoltaics, hence the term
photovoltaic (PV) cells. Such cells are made of semiconductor materials such as
silicon, whose property is to knock electrons loose when they absorb energy, in this
case, solar energy. The PV cells also have one or more electric fields whose
purpose is to force the loose electrons in one direction, similar to how a diode
functions, hence the formation of a current. This current can then be used
externally using metal contacts at the top and bottom of the PV cell as can be
seen in the figure below.
Solar cells adalah merupakan perangkat yang mengubah energi matahari menjadi
energi listrik dengan bidang teknologi yang disebut sebagai photovoltaic, oleh
karena itu muncul istilah photovoltaic cell. Cell terbuat dari material semikonduktor
berupa bahan silicon, yang mana bahan ini mengetuk elektron lepas ketika mereka
menyerap energi, dalam hal ini, energi surya. PV cell juga memiliki satu atau lebih
medan listrik yang mana bertujuan untuk memberi gaya terhadap elektron lepas
dalam sat arah, serupa dengan fungsi diode karena cara pembentukkan arusnya.
Arus ini bisa kemudian digunakan menggunakan kontak metal tambahan
(elektroda) yang ada di bawah serta di atas dari PV cell yang dapat dilipat dilihat
dari gambar berikut ini:
iv. Reflection from rear out of cell- absorbed light only; (Pembiasan dari bagian
belakang cell hanya terjadi penyerapan cahaya )
v. Absorption after reflection; (Penyerapan setelah pembiasan)
vi. Absorption in rear contact; (Penyerapan pada bagian belakang kontak)
In a practical system, one PV cell will not be able to provide sufficient energy. Thus,
several cells are grouped together to form a PV module, and several modules are
grouped together to form a PV array. This combination of cells is what allows for
a larger percentage of solar power to be absorbed due to a larger area of PV
cells, and thus more current and voltage to be produced at the output. The solar
PV array or module used has to be carefully designed to produce the right amount
of power to charge the battery and also has to be designed to adhere to
the charging characteristics of the battery as much as possible so as to minimize
losses. Below epitomizes the formation of the PV module and array from the PV cell.
Dalam sebuah system sederhana, sebuah PV cell tidak akan mampu menyediakan
energi yang cukup. Dengan demikian, beberapa cell di kelompokan bersama hingga
membentuk sebuah PV module, dan beberapa module di kelompokan bersama
hingga membentuk sebuah PV array. Kombinasi dari cell-cell ini adalah
kemungkinan untuk menjadika persentase lebih besar dari Tenaga matahari yang
diserap dikarenakan area PV cell yg besar, dan kemudian akan dihasilkan arus dan
tegangan yang lebih pada output. PV solar array atau module digunakan telah
dirancang dengan sebaiknya untuk memproduksi untuk mengahasilkan daya yg
sesuai untuk men-charge battery dan juga dirancang untung mematuhi
karakteristik charging dari baterai sebanyak mungkin untuk meminimalisir rugi-rugi.
Gambar dibawah menggambarkan dari PV modul dan array dari PV cell.
Generally, the series resistance is very small, and the shunt resistance is very large,
making these losses almost negligible. Upon observation of the IV characteristics of
a commercial solar panel such as the SQ150, it can be seen that changes in
irradiance bring about significant changes in the panel short circuit current but
barely affect the open circuit voltage. In effect, the short circuit current is
approximately proportional to the irradiance. proposes that the current source
used in the solar cell model be one that is dependent on a voltage; this voltage in
turn is representative of the irradiance condition. Thus, the cells characteristics
can be made to vary with irradiance in a way that mimics the variations in
the IV profile of a practical solar cell. A solar panel can be constructed out of
series and parallel connections of the solar cell model given above. But, keeping in
mind that the objective of the modeling process was to simply obtain a system
whose IV characteristics are identical to that of a solar panel, another method was
used: It was found that the open circuit voltage of the solar cell model is roughly
proportional to the number of series-connected diodes that are in parallel to the
short-circuit current source. Thus, by adding more diodes and increasing the
short-circuit current, the characteristics of the solar cell become more and
more like that of a panel. A photovoltaic panel is constructed out of several cells
in series and parallel combinations. This allows a panel to output an utilizable
voltage and current. The figure below illustrates the typical Current-Voltage (I-V)
characteristics of a PV panel.
Umumnya, resistansi seri sangat kecil, dan resistansi parallel sangat besar,
membuat rugi-rugi ini hampir bisa diabaikan. Pada pengamatan dari ke IV
karakteristik dari sebuah solar panel komersial sebagai contoh SQ150, dapat dilihat
bahwa perubahan radiasi membawa perubahan yang signifikan dalam arus hubung
singkat panel tapi hampir tidak mempengaruhi pada tegangan sirkuit terbuka.
Dalam pengaruhnya, arus hubung singkat adalah sebanding dengan radiasi
tersebut. mengusulkan bahwa sumber arus digunakan dalam model solar cell sel
surya menjadi bergantung terhadap tegangan; tegangan tahap ini adalah
representasi dari kondisi radiasi. Kemudian karakteristik cell bisa terbentuk
bervariasi dengan radiasi dengan cara meniru variasi profile IV dari sel surya
sederhana. Solar cell bisa dibentuk dari hubungan seri dan parallel dari mdel solar
cell yang disebut sebelumnya. Tapi mengingat bahwa tujuan dari proses pemodelan
adalah untuk hanya mendapatkan sistem IV karakteristik yang identik dengan panel
surya, metode lain yang dapat digunakan: menemukan bahwa tegangan rangkaian
terbuka dari model sel surya kira-kira sebanding dengan jumlah diode yang
terhubung seri yang sejajar dengan sumber arus hubung singkat. Kemudian dengan
menambahkan beberapa diode dan meningkatkan arus hubung singkat,
karakteristik solar cell menjadi lebih dan lebih seperti sebuah panel. Panel
photovoltaic terbentuk dari beberapa dengan kombinasi hubungan seri dan parallel.
Hal ini memungkinkan sebuah panel dengan output berupa tegangan dan arus
pakai. Gambar di bawah mengilustrasikan tipe Current-Voltage (IV) karakteristik dari
panel PV.
The curve shows how the current supplied by a PV panel varies with its
voltage. The point of maximum power occurs at the knee of the curve and is
called the maximum power point (MPP). The maximum power is given by
Pmpp = Vmpp x Impp
Berikut kurva yang menunjukkan bagaimana arus yang disuplai oleh PV panel
berbeda dengan tegangannya. Titik daya maksimum terjadi pada siku ujung kurva
dan dinamakan dengan Maximum Power Point (MPP).
Nilai dari Daya Maximum didapat dari persamaan:
Pmpp = Vmpp x Impp
In order for the PV panel to supply maximum power, it should supply a load of
resistance (Rmpp):
Rmpp = Vmpp / Impp
If the load resistance as seen by the panel is below this value, the bias point would
move to the left of the MPP, and to the right if the resistance is above this value.
Urutan dari PV panel untuk suplai daya maximum, seharusnya suplai sebuah beban
dari resistansi (Rmpp):
Rmpp= Vmpp/Impp
Jika resistansi seperti yang terlihat dari panel dibawah nilai ini, point bias akan
berpindah dari kiri menuju MPP nya, dan menuju ke kanan jika resistansi diatas
nilai ini.
5 persen setiap tahun, dan energi surya adalah salah satu pilihan yang dapat
memuaskan permintaan besar dan terus meningkat permintaan tersebut.
V. CONCLUSION
PV cells are a proven environmentally benign power source whose attractive
characteristics will continue to further photovoltaic research. Because current
PV systems are still highly inefficient and uncommon, they are not yet cost
competitive with fossil fuel-based generators and are only regularly used
where there is no nearby power source. Photovoltaic advancements in the
fields of thin film and nanocrystalline materials will continue to flourish and
soon increase PV efficiency to over 50%. As efficiency increases, PV technology
will attract a greater number of people, resulting in reduced cost. Because the
sun delivers ten thousand times more energy than people currently consume,
photovoltaic improvements will one day replace environmentally unfriendly
power plants with a proven and clean energy source.
Sel PV terbukti sumber listrik ramah lingkungan dengan karakteristik menarik dan
akan terus muncul penelitian lanjut photovoltaic. Karena sistem PV saat ini masih
sangat tidak efisien dan jarang, mereka belum bisa bersaing dengan pembangkit
berbasis bahan bakar fosil dan hanya digunakan secara teratur di mana tidak ada
sumber listrik di dekatnya. Kemajuan fotovoltaik di film dan nanokristalin bahan
tipis akan terus berkembang dan segera meningkatkan efisiensi PV untuk lebih dari
50%. Efisiensi meningkat, teknologi PV akan menarik lebih banyak orang, sehingga
mengurangi biaya. Karena matahari memberikan sepuluh ribu kali lebih banyak
energi daripada orang saat mengkonsumsi, perbaikan fotovoltaik akan suatu hari
Photons in sunlight hit the solar panel and are absorbed by semiconducting
materials, such as silicon.
Foton di bawah sinar matahari mengenai panel surya dan diserap oleh bahan
semikonduktor, seperti silikon.
Elektron sangat ditarik dari mereka molekul / atom orbital. Setelah ditarik
elektron menghilangkan/menghambusrkan energi dalam bentuk panas dan
kembali ke orbital nya atau berjalan/berpindah melalui cell hingga mencapai
elektroda. Array sel surya mengubah energi matahari menjadi jumlah yang
dapat digunakan arus searah (DC) listrik.
Inverter dapat mengkonversi kekuatan untuk arus bolak-balik (AC).