CAD - 1
PRODI TEKNIK SIPIL -
UNNES
Triono Subagio
MENGGAMBAR DENGAN PERINTAH-
PERINTAH DASAR
1. LAYER (LA)
Command: LA <ENTER>
2. RECTANGLE (REC)
Aktifkan layer PENAMPANG KAYU
Command: PL <ENTER>
PLINE
Specify start point: <KLIK SEMBARANG>
Current line-width is 0.0000
Specify next point or [Arc/Halfwidth/Length/Undo/Width]:
<Ortho on> @50,0 <ENTER>
Specify next point or
[Arc/Close/Halfwidth/Length/Undo/Width]: @0,30 <ENTER>
Specify next point or
[Arc/Close/Halfwidth/Length/Undo/Width]: @10,0 <ENTER>
Specify next point or
[Arc/Close/Halfwidth/Length/Undo/Width]: @0,90 <ENTER>
Specify next point or
[Arc/Close/Halfwidth/Length/Undo/Width]: @-60,0 <ENTER>
Specify next point or
[Arc/Close/Halfwidth/Length/Undo/Width]: C <ENTER>
Command: PL <ENTER>
PLINE
Specify start point: <KLIK SEMBARANG>
Current line-width is 0.0000
Specify next point or [Arc/Halfwidth/Length/Undo/Width]:
<Ortho on> @90,0 <ENTER>
Specify next point or
[Arc/Close/Halfwidth/Length/Undo/Width]: @0,-10 <ENTER>
Specify next point or
[Arc/Close/Halfwidth/Length/Undo/Width]: @30,0 <ENTER>
Specify next point or
[Arc/Close/Halfwidth/Length/Undo/Width]: @0,-50 <ENTER>
Specify next point or
[Arc/Close/Halfwidth/Length/Undo/Width]: @-120,0 <ENTER>
Specify next point or
[Arc/Close/Halfwidth/Length/Undo/Width]: C <ENTER>
4. TOMBOL F8 (ORTHO)
Command: PL <ENTER>
PLINE
Specify start point:<KLIK SEMBARANG>
Current line-width is 0.0000
Specify next point or [Arc/Halfwidth/Length/Undo/Width]:
120 <ENTER>
Specify next point or
[Arc/Close/Halfwidth/Length/Undo/Width]: 50 <ENTER>
Specify next point or
[Arc/Close/Halfwidth/Length/Undo/Width]: 30 <ENTER>
Specify next point or
[Arc/Close/Halfwidth/Length/Undo/Width]: 10 <ENTER>
Specify next point or
[Arc/Close/Halfwidth/Length/Undo/Width]: 90 <ENTER>
Command: PL <ENTER>
PLINE
Specify start point: <KLIK SEMBARANG>
Current line-width is 0.0000
Specify next point or [Arc/Halfwidth/Length/Undo/Width]:
120 <ENTER>
Specify next point or
[Arc/Close/Halfwidth/Length/Undo/Width]: 60 <ENTER>
Specify next point or
[Arc/Close/Halfwidth/Length/Undo/Width]: 90 <ENTER>
Specify next point or
[Arc/Close/Halfwidth/Length/Undo/Width]: 10 <ENTER>
Specify next point or
[Arc/Close/Halfwidth/Length/Undo/Width]: 30 <ENTER>
Specify next point or
[Arc/Close/Halfwidth/Length/Undo/Width]: C <ENTER>
6. ARSIR
Command: H <ENTER>
Pick internal point or [Select objects/Undo/seTtings]: T
<ENTER>
PRAKTIK ST.
2. T : PENULISAN TEKS
3. MT : PENULISAN TEKS
4. DT : PENULISAN TEKS TUNGGAL
5. ED : EDIT TEKS
PRAKTIK !
PENJAJARAN TEKS
B : BOTTOM
M : MIDDLE
T : TOP
C : CENTER
L : LEFT
R : RIGHT
PRAKTIK D.
2. DLI : DIM-LINEAR
3. DAL : DIM-ALIGNED
4. DAN : DIM-ANGULAR
PRAKTIK!
CATATAN :
.......................................................................................................................................
.......................................................................................................................................
.......................................................................................................................................
.......................................................................................................................................
.......................................................................................................................................
CATATAN :
............................................................................................................................
............................................................................................................................
............................................................................................................................
............................................................................................................................
............................................................................................................................
2. MV (MULTIVIEW)
4. PAN
5. PS