Command: Specify start point of arc or [Center]: Specify second point of arc or [Center/End]: c Specify center point of arc: @130.38<0 Specify end point of arc or [Angle/chord Length]: a Specify included angle: 225
Command: mi MIRROR Command: Select objects: 1 found Select objects: Specify first point of mirror line: Specify second point of mirror line: Erase source objects? [Yes/No] <N>: y
Command: arc Command: Specify start point of arc or [Center]: Specify second point of arc or [Center/End]: c Specify center point of arc: @24.62<5 Specify end point of arc or [Angle/chord Length]: a Specify included angle: 135
Command: l LINE Command: Specify first point: Specify next point or [Undo]: @62<50 Specify next point or [Undo]: *Cancel*
Command: arc Command: Specify start point of arc or [Center]: Specify second point of arc or [Center/End]: c Specify center point of arc: @63.34<320 Specify end point of arc or [Angle/chord Length]: a Specify included angle: 180
Command: mi MIRROR Command: 1 found Specify first point of mirror line: Specify second point of mirror line: Erase source objects? [Yes/No] <N>: y
Command: l LINE Command: Specify first point: Specify next point or [Undo]: @145<230 Specify next point or [Undo]: *Cancel*
Command: arc Command: Specify start point of arc or [Center]: Specify second point of arc or [Center/End]: c Specify center point of arc: @131.14<310 Specify end point of arc or [Angle/chord Length]: a Specify included angle: 45
Command: c CIRCLE Command: Specify center point for circle or [3P/2P/Ttr (tan tan radius)]: ttr Specify point on object for first tangent of circle: Specify point on object for second tangent of circle: Specify radius of circle: 50
Command: c CIRCLE Command: Specify center point for circle or [3P/2P/Ttr (tan tan radius)]: Specify radius of circle or [Diameter] <17.0000>: 17
Command: _dimarc Command: Select arc or polyline arc segment: Specify arc length dimension location, or [Mtext/Text/Angle/Partial/Leader]: Dimension text = 58.01
Command: _dimarc Command: Select arc or polyline arc segment: Specify arc length dimension location, or [Mtext/Text/Angle/Partial/Leader]: Dimension text = 512
Command: _dimarc Command: Select arc or polyline arc segment: Specify arc length dimension location, or [Mtext/Text/Angle/Partial/Leader]: Dimension text = 198.99
Command: _dimarc Command: Select arc or polyline arc segment: Specify arc length dimension location, or [Mtext/Text/Angle/Partial]:
512
19
8,
99
58,0
Command: _dimaligned Command: Specify first extension line origin or <select object>: Specify second extension line origin: Non-associative dimension created. Specify dimension line location or [Mtext/Text/Angle]: Dimension text = 62
Command: _dimaligned Command: Specify first extension line origin or <select object>: Specify second extension line origin: Specify dimension line location or [Mtext/Text/Angle]: Dimension text = 145
10
19
8,
99
58,0
62
14
Command: _dimlinear Command: Specify first extension line origin or <select object>: Specify second extension line origin: Specify dimension line location or [Mtext/Text/Angle/Horizontal/Vertical/Rotated]: Dimension text = 34
Command: _dimlinear Command: Specify first extension line origin or <select object>: Specify second extension line origin: Specify dimension line location or [Mtext/Text/Angle/Horizontal/Vertical/Rotated]: Dimension text = 100
10
512
19 8,
99
58,0
62
14
34 100
10