DIREKTORAT JENDERAL
PEMBINAAN PELATIHAN DAN PRODUKTIVITAS
BALAI LATIHAN KERJA
Jalan Karel Satsuitubun No 46, Passo 97231, Telepon ( 0911) 361893 Faksimile (0911) 361893
1. LATAR BELAKANG : Bahwa untuk memenuhi tuntutan reformasi dalam bidang pelatihan
ketanagakerjaan, Balai Latihan Kerja Ambon menyusun Program
Pembaruan untuk pemenuhan kebutuhan peralatan pelatihan
sebagai lembaga yang bertugas untuk peningkatan pengembangan
sumber daya manusia di bidang pelatihan kerja.
Reformasi Birokrasi berupa penataan organisasi, perbaikan
tatakerja, pengembangan sumber daya (Capacity Building),
perbaikan sistem Renumerasi, dan manajemen dukungan Teknologi
Informasi. Pelaksanaan Reformasibirokrasi tersebut diukur dengan
Akreditasi Penjaminan Mutu Untuk mewujudkan Performa/Kinerja
Balai Latihan Kerja Ambon Yang Unggul/Prima (Indonesia Court
Performance Excellent - ICPE)
Berdasarkan kebijakan Umum tersebut di atas, maka Balai
Latihan Kerja Ambon telah menindak lanjutinya dengan menetapkan
kebijakan menyusun Program Kerja yang menitikberatkan pada skala
prioritas Program Kerja yakni :
1. Peningkatan manajemen organisasi dan tatakerja.
2. Peningkatan Sumber Daya Manusia.
3. Peningkatan Manajemen Pelatihan Kerja.
4. Peningkatan penataan administrasi umum dan pelayanan
Pelatihan.
Untuk memenuhi hal-hal tersebut diatas maka diperlukan
Peralatan dan fasilitas Pelatihan yang Baik dan tepat fungsi yang
dananya dibebankan pada DIPA tahun 2019 Balai Latihan Kerja
Ambon.
Kegiatan Pengadaan Peralatan dan Fasilitas Asrama ini
dilaksanakan untuk mendukung kebutuhan pelayanan kepada
masyarakat pencari kerja melalui fasilitas pelatihan yang memadai
dan representatif
2. MAKSUD DAN TUJUAN : Maksud dari pekerjaan ini adalah terlaksananya pengadaan Sarana
Peralatan Institusional sesuai dengan perencanaan baik dari segi
Volume, kualitas, biaya dan ketepatan waktu.
Tujuan dari pekerjaan ini adalah untuk meningkatkan sarana dan
prasarana Pelatihan di Balai Latihan Kerja Ambon dalam menjadikan
Balai Latihan Kerja Ambon Sebagai Pusat Pengembangan Pelatihan
(di Provinsi Maluku.
3. TARGET DAN SASARAN : Target dan sasaran yang ingin dicapai dari pekerjaan ini adalah
Peralatan dan fasilitas pelatihan berupa belanja modal Sarana
Peraltan Indtitusional
5. SUMBER DANA DAN : a. Sumber Dana : DIPA Tahun anggaran 2020 No. SP. DIPA. 026.13.
PEMBIAYAAN 219228.
b. Total Perkiraan Biaya Pekerjaan/HPS : Rp 1.992.510.000,- (Satu
Milyar Sembilan Ratus Sembilan Puluh Dua Juta Lima Ratus Sepuluh
Ribu Rupiah )
7. JANGKA WAKTU : 30 (Tiga Puluh Lima) hari kalender sejak ditanda tanganinya Surat Perintah
PELAKSANAAN Mulai Kerja
PEKERJAAN
1 2 3 4 5
* Gintel HD Graphics
* Display 21"
* Qs Windows 10 Home
* Kabel Power
* Keyboard
* Mouse
* Instalasi
2 Lemari Arsip * Model Number MF-8-22 v 1 Set
Alba Mobile File Manual MF-8-22 Unit *Dimension 2200 x 1000 x 4100
7 Gas Cutting Machine Pipe Automatic - Available in Hand Operated and Motorized versions v 1 SET
- The machine can cut pipes of diameter 150 mm or more
by quickly and easily changing the length of the chain
easily changing the length of the chain
- Cutting can be done in clockwise or anti-clockwise
direction from both
sides of the machine
- The machine can cut bevels of up to 45o by selecting
the required angle
on the torch holder
- The machine torch can be adjusted vertically and
horizontally alongside
the pipe surface by rack and pinion attachments
- The model PM-45P machine can also be used to cut
Stainless Steel and
other Non-Ferrous pipes by using Plasma Cutting
Torch (Torch holder to
suit your Plasma Cutting Torch can be supplied as an
optional attachment)
- Remote Control Unit (1 set) supplied with the motorized
version
Specifications
Chain type single-link chain
Quick release clutch With
Cutting speed 50-1150mm/min
Effective pipe diameter 150~600mm (6"~24")by standard
chain
Larger size over 600mm by extra chain addition
Cutting thickness up to 50mm (2")
Cutting shape Square and bevel (up to 45o)
Drive method Motorized
Main Size 265*420*450
Weight 16kg
8 Mesin Digital Printing Printing Speed Mode : 3 Pass = 12m²/Jam, 4 Pass = v 1 SET
10m²/Jam, 6 Pass = 8 m²/Jam
Infiniti V5 - S1600 Print Width 1500 mm
Weight: 40kg
Size: 520x480x510mm (packing size)
Technical Data :
3Ton Low Profile Floor Jack (Min.height:100mm)
Capacity : 3Ton
15 Dongkrak Buaya (Hydraulic jack) v 2 SET
Min. Height : 100mm
Max. Height : 530mm
N.W. : 44kgs
Technical Data :
5Ton Long Floor Jack
Capacity : 5 Ton
16 Dongkrak Buaya (Hydraulic jack) v 2 SET
Min. Height : 160mm
Max. Height : 560mm
N.W. : 90kg
Features
Designed for shops with limited space.
Folds for easy storage.
Heavy steel construction for maximum durability.
Boom is reinforced to increase strength and eliminate
flex.
Telescopic boom provides 4 positions.
Includes heavy steel hook with safety latch.
Wide base for maximum stability.
Specifications
Capacity: 2T
Lifting Height : 236cm
17 Alat Pengangkat Mesin v 1 SET
Boom Length: 40”- 63” / 1016-1600 mm.
Base Length: 69” / 1753 mm.
Boom Capacities:
4,400 lbs / 1996 Kg.
3,300 lbs / 1497 Kg.
2,200 lbs / 998 Kg.
1,100 lbs. / 499 Kg.
Maximum Boom Height:
80” / 2032 mm.
84” / 2134 mm.
89” / 2261 mm.
93” / 2362 mm
30Ton Hydraulic shop press with gauge
Capacity : 30ton
N.W. : 113kg
18 Mesin Press G.W. : 120kg v 1 SET
Package Size : 163X47X24cm
Working Range : 0-1070mm
Width : 460mm
Heshbon
HW-105
Technical Data :
Basic measurement function : toe, camber, caster,
kingpin inclination, setback, thrust angle , included
angle.
Additional function : max turning angle , toe-out -on-
turn, wheel roll radius measurement , tire rotations rate ,
axle offset , wheel offset, track width/wheelbase, vehicle
lifting measurement, alignment platform level detection
, toe constant value measurement.
Outstanding Function, Unique Accurate Target , 5.0
mega USB3.0 digital camera
Drive-on camera assistance, 32'' monitor , Over 40
thousand vehicles database
Operating Temperature : -30℃-50℃
20 Mesin Spooring v 1 SET
Power Consumption : 300W
Wheel Size : 279.4mm-6009.6mm
Tire Diameter : No limit
Track Width : 1220mm-2450mm
Wheel Base : 1600mm-4700mm
Power Requirement : 110-240V 50/60 HZ
Profile of wheell adaptor : 11-25 inch
Standar Acessories :
Intelligent Auto Lifting Pole, HP/Lenovo/Dell Computer
32" LCD monitor, Unique Target Disks
Deluxe Holding Tire Clamps, High Definition Camera
Steering Wheel Lock, Brake Lock
Wedge-shaped Pads, Turntables
Canon/HP/EPSON Printer
SpecificationsMeasurement Range (dBm) -
50~+26Wavelength Range (nm) 800-1700Connector
Universal connector FC/SC/ST ( FC as standard, SC and ST
adapter as options)Detector Type InGaAsUncertainty
±5%Calibrated Wavelength (nm) 850, 980, 1300, 1310,
1490, 1550, 1625, 1650Display Resolution Linear: 0.1%,
logarithmic: 0.01dBm Auto Power Off (min) 10Power Supply
1. 5V AA alkaline battery (3 pcs)Low Battery Indication Low
battery indication at about 3.3V, auto power off at about
3VBattery Operation Time (h) ≥60Drop Height (M)
2Operating Temperature 0℃~40℃Storage Temperature -
10℃~50℃Dimensions (mm) 189×87×45Net Weight (g)
286Certification CE, IP65,RoHSGeneral
21 Optical Power Meter (OPM) CharacterisiticsPower 1.5V battery x 3Product color Red and v 16 SET
greyProduct net weight 286gProduct size 189mm x 87mm x
45mmStandard accessories 1.5V Batteries, English manual,
Dedicated pouchStandard individual packing gift
boxStandard quantity per carton 10pcsStandard carton
measurement 295mm x 250mm x 210mmStandard carton
gross weight 14.5Kg(TBC)
Applicable FibersSM, MM, DS, NZDS, EDF
Splicing Fiber Single core
Average Splicing
Loss0.02dB(SM),0.01dB(MM),0.04dB(DS),0.04dB(NZDS)
Fiber Diameter Cladding Φ 80~150μm, Coating Φ
100~1000μm
Splicing ModeAuto & Manual & Half Auto
Splicing Time Typical 9s with standard SM fiber
Heating TimeTypical 25s
Electrode Life2500 times
Tension Test2.0N(Standard)
22 Fusion Splicer v 8 SET
Display5 inch TFT color LCD
Magnification X/Y:200 times, X or Y: 400 times
Data Storage10000 traces
Data ConnectorUSB
Power Supply Lithium Battery or AC/DC Adapter
Battery Capacity Typical 200 cycles(splicing and
heating)
Environmental Conditions-10~+50 (operation
temperature),0~95% RH(humidity),0~5000(altitude)
Size(H*W*D)146mm * 131mm * 52mm
Weight1.551kg
Built-in VFL Built-in OPM (Optional) High contrast color TFT LCD
Automatic one-button testing Easy to operate for beginners and
experts Integrated PALM design, small, light, easy to carry Input
laser signal auto detection and self-protection User-friendly OTDR
simulation software shows details of events Dead Zone
Event:1.5m/Attenuation:5.0m (4m/9m@850nm)Pulse Width
S/A:5ns-10us, B/C:5ns-20us, MM-A:5ns-1usDistance uncertainty
±(0.8m ± 0.005% * testing distance ± resolution)Loss Resolution
0.001dBMin.Distance Resolution 0.1mConnector FC
interchangeable adapter (optional: SC,ST,LC interchangeable
adapters)OPM (Optional) T:+8~-70dBm or C:+26~-50dBm, only
available when OTDR is only one connectorVFL 1mWData Storage
Internal (TF card is optional)Display 3.5 inch TFT color LCDBattery
Built-in rechargeable batteryWorking Time Standby>15 hour,
measurement>8hourSize(H*W*D) 197mm * 107mm *
23 Optical Time Domain Reflecto v 8 SET
67mmWeight About 750gStorage Temperature -20 -- +60 ℃, <
90%RHOperating Temperature -10 -- +50 ℃, < 90%RHS
1310/1550 24/22dBA
1310/1550 28/26dBB
1310/1550 32/30dBC
1310/1550 36/34dBPB
1310/1550/1625 36/34/34dBMM-
A 850/1300 22/24dB