TABLE OF CONTENTS
DAFTAR ISI
1 DESCRIPTION / DESKRIPSI 1
2 REFERENCES / REFERENSI 1
3 SAFETY / KESELAMATAN 1
4 PREREQUISITES / PRASYARAT 1
5 PRECAUTIONS / PENCEGAHAN 2
6 TOOLS AND SPARE PARTS / ALAT DAN SUKU CADANG 2
7 PROCEDURE / PROCEDURE 2
ABBREVIATIONS
SINGKATAN
i
DOC:
WELDING WORK FOR WELLPAD M
SERD
PEKERJAAN PENGELASAN UNTUK WELLPAD M
REV:
Install and welding steam pipe line Wellpad Pemasangan dan pengelasan sistem jalur pipa
M Wellpad M
2. REFERENCES 2. REFERENSI
3. SAFETY 3. KEAMANAN
1. Maintenance personnel shall follow all 1. Personel pemeliharaan harus mengikuti
local plant safety guidelines while semua pedoman keselamatan instalasi
performing this maintenance. lokal saat melakukan pemeliharaan ini.
2. The work area is in a place that has 2. Area kerja berada ditempat yang memiliki
noise, use ear protection. kebisingan, gunakan alat pelindung telinga.
3. The work area is in a hot place, use hand 3. Area kerja berada di tempat yang panas,
protection. gunakan alat pelindung tangan.
4. The work area is in a place where there is 4. Area kerja berada di tempat yang berisiko
a risk of H2S toxic gas. adanya gas beracun H2S.
4. PREREQUISITES 4. PRASYARAT
1. Review this entire instruction before 1. Tinjau seluruh instruksi ini sebelum
commencing any maintenance. If any memulai perawatan apa pun. Jika ada
procedural or technical changes are perubahan prosedural atau teknis yang
required to update the contents of this diperlukan untuk memperbarui isi instruksi
instruction, report them to the CMMS ini, laporkan ke administrator CMMS untuk
administrator for correction. dikoreksi.
1
DOC:
WELDING WORK FOR WELLPAD M
SERD
PEKERJAAN PENGELASAN UNTUK WELLPAD M
REV:
4. Apply permit to work and obtain safety 4. Terapkan izin untuk bekerja dan dapatkan
safety access permit. izin akses keselamatan.
2
DOC:
WELDING WORK FOR WELLPAD M
SERD
PEKERJAAN PENGELASAN UNTUK WELLPAD M
REV:
7. PROCEDURE 7. PROSEDUR
WARNING PERINGATAN
Do not approach the area where there is a Jangan mendekat ke area yang akan
risk of sparks and toxic gas berisiko timbul percikan api dan gas
beracun
1. Preparing (work equipment,
administrative). 1. Mempersiapakn (peralatan kerja,
administrasi).
2. Make sure the tools and standart PPE.
2. Pastikan alat dan APD standart.
3. Energy isolation shall be implemented
with the application of LOTO to prevent 3. Isolasi energy dilaksanakan dengan
serious injury or death of personnel as penerapan LOTO untuk mencegah
H2S accumulation or remaining cedera serius atau kematian peronel
pressurized fluid. sebagai akumulasi H2S atau sisa tekanan
cairan.
4. Toolbox meeting shall be held at the
location by the team prior to work 4. Toolbox meeting diadakan dilokasi oleh
exection. tim sebelum pelaksaan pekerjaan.
5. Fabrication pipe 18 inch sch 40 5. Fabrikasi Pipa 18 inci ketebalan 40
6. Lifting Support pipe 18” 6. Lifting support pipe 18”
7. Lifting Pipe 18 inch sch 40 7. Pengangkatan pipa 18 inci ketebalan 40
8. Install and full welding pipe line 18 inch 8. Pemasangan dan pengelasan jalur pipa
sch 40 18 inci ketebalan 40
9. Non destructive test (NDT) in joint 9. Pengujian tanpa merusak pada hasil
welding. sambungan lasan.
Comments: