Latihan Abaqus
Latihan Abaqus
NIM : 17/410366/TK/45723
Kelas : Selasa @09.40
LATIHAN 1 KELAS
SOAL:
For the plate shown in Figure P7-23, determine the maximum principal stresses and their
locations. let E= 210 GPa and v = 0.25
Determine the stresses in the wrench shown in Figure P7-25. Let E= 200 GPa and v =
0.25, and assume uniform thickness t = 10 mm
JAWAB:
1. Pada kasus ini, digunakan data-data berikut:
t = 10 mm
N = 5000 N pada ujung benda
Boundary benda constrain fix pada ujung kiri
Mesh = 10
Maka dapat deketahui nilai principal max stress pada kasus tersebut adalah sebesar 6.126
GPa yang terjadi akibat adanya stress concentration pada edge benda yang tidak diberi
fillet.
Dar simulasi tersebut, diperoleh nilai makximal von misses sebesar 46.49 GPa
Max. Principal Stress
Dari simulasi tersebut, diperoleh nilai makximal principal stress sebesar 45.19
GPa
Tresca
Dari simulasi tersebut, diperoleh nilai makximal tresca sebesar 49.11 GPa