GM-GEO-PR-014 Resource Estimation
GM-GEO-PR-014 Resource Estimation
Resources Estimation
Versi Tanggal Terbit No Dokumen Nama Dokumen Disusun Oleh Ditinjau Oleh Disetujui Oleh
Version Issued Date No. Document Document Tittle Prepared By Reviewed By Approved By
1. Setiono
Afif Abiyya K Hary Irmawan
2. Indra Y. Rimayansyah
Estimasi
Sumberdaya 1.
1.0 25 November 2022 GM-GEO-PR-014
Resources Estimation
2.
Standard Operating Procedure
Uncontrolled Documents When Printed
5. Prosedur / 5 Procedure.................................................................................................................... 8
1. Umum / General
4.Ketentuan Umum
4.General Requirement
Ada beberapa peraturan penting mengenai
pemodelan dan estimasi sumberdaya, yaitu:
Pemodelan geologi harus dilakukan There are a few essential rules of geology
oleh geologist yang memiliki modelling and resources estimation, which
pengalaman yang relevan dalam tipe included:
komoditi dan deposit yang di kerjakan Modelling geology shall be conducted
Modelling geologist harus by geologist who have relevant
berkoordinasi dengan Senior experience in their commodity type
Geologist and deposit.
mengenai interpretasi mineralisasi dan Modelling geologist should coordinate
model geologi. with Senior Geologist related to
mineralisation interpretation and
geology models
5.Prosedur
5.Procedure
5.1. Kompilasi Database
5.1.2 Validasi
Database sudah divalidasi sebelum proses 5.1.2 Validasi
perhitungan sumberdaya dilakukan. Proses The database has been validated before the
validasi ini dilakukan menggunakan perangkat resource calculation carried out. The validation
lunak pemodelan & perangkat lunak database, process was conducted using modeling Raw
hal-hal umum yang divalidasi antara lain: geological data is input directly to Excel
pemeriksaan penamaan nomor lubang bor,
worksheet. Database geologist wil validate all
pemeriksaan interval kedalaman yang hilang,
excel data daily. Once all the data has been
pemeriksaan inklinasi dan azimuth,
pemeriksaan collar dan kedalaman lubang bor. corrected, data will be loaded into GeoBank
database. software and database software,
Apabila terdapat error/kesalahan database common things that validated include:
maka tindakan yang dilakukan adalah
inspection naming drillhole number, inspection
mengkaji ulang foto dokumentasi core yang
interval missing depth, inclination and azimuth
masih utuh atau langsung melihat sisa core
(half core) yang tersimpan di gudang core inspection, examination and the depth of the
(core storage). Prosedur validasi database ini drillhole collar.
sudah mengikuti kaidah yang disepakati If there are errors/mistakes in databases then
sehingga data yang akan digunakan the action taken is reviewing the photo
berkualitas. / documentation of core intact or directly see the
rest of the core (half core) that are stored in
core storage. Database validation procedure is
already followed the rules agreed upon so that
the data to be used are already qualified.
5.1.3 Interpretasi Mineralisasi
5.1.3 Mineralisation Interpretation
Parameter interpretasi menggunakan batas
Parameter interpretation using cut-off 0.5ppm
bawah 0.2 ppm Au untuk sebagian besar
Au for most of the deposit, with a maximum
deposit, dengan ketebalan maksimum dilusi
bervariasi tergantung pada jenis dan dimensi dilution thickness varies depending on the type
deposit. and dimensions of the deposit.
Metoda agregasi data dipakai dalam Aggregation method used in the interpretation
interpretasi, contohnya apabila terdapat step, for example when there is a barren
interval barren (<2m) diantara 2 domain interval (<2m) between two mineralization
mineralisasi maka interval barren tersebut domain, the interval is ignored and considered
diabaikan dan dia anggap menjadi bagian to be part of the mineralized domain, this is
domain mineralsasi, hal ini diakukan jika tidak done when there are no indications of
ditemukan indikasi struktur yang signifikan significant structures along the interval.
disepanjang interval tersebut.
Sebelum proses komposit nilai assay, kita Before composite the assay value, we need to
harus melakukan analisis statistic klasik untuk conduct a classical statistic to verify that there
memverifikasi bahwa hanya terdapat satu isonly one population within each domain & to
populasi data disetiap domain dan identify any erratic high grade value. Those
untukmengidentifikasi keberadaan kadar tinggi erratic high grade values should be reduced,
yang eratik. and then so-called top cut. The mean plus 2 nd
standard deviation, also known as the 97.7
Kadar tinggi yang eratik tersebut harus
percentile, is widely accepted as a top cut
dikurangi, yang biasa disebut top-cut. Nilai
value within the mineral industry.
rata-rata ditambah standar deviasi kedua,
yang biasa disebut persentil 97.7, secara If mixed population can be statistically &
umum diterima di industri mineral sebagai nilai spatially separated, the domain will be suitable
top-cut. for either IDW or OK grade interpolation.
Jika populasi data yang beragam bisa
dipisahkan secara statitik dan spasial, maka
Berikut ini adalah parameter yang digunakan Here below the parameter that used to define
dalam menentukan model teoritis semi- a theoretical semi-variogram model :
variogram : Nugget (Co): In theory the semi-variogram at
the origin (lag=zero) should be zero. If it’s
Nugget (Co): Dalam teori semi-variogram, titik different from zero at lags very close to zero,
asal harus nol. Jika itu berbeda dari nol pada then the difference is referred to as the
lag sangat dekat dengan nol, maka perbedaan NUGGET. It represents variability at distance
ini disebut sebagai NUGGET. Ini mewakili smaller than the typical sample spacing,
variabilitas pada jarak lebih kecil dari spasi including measurement error. To model the
sampel, termasuk kesalahan pengukuran. Nugget, extrapolate the first few experimental
Cara pemodelan Nugget adalah dengan semi-variogram values to the Y-axis.
mengekstrapolasi beberapa nilai semi- Number and type of structures
variogram eksperimental ke sumbu Y. (component): Look for distinct changes in the
Jumlah dan tipe struktur (komponen):
slope of the experimental semi-variogram,
Mencari perubahan yang tampak berbeda
which may reveal the number of structures
pada kemiringan semi-variogram
needed to fully model it.
eksperimental, hal ini dapat mengungkapkan
jumlah struktur yang dibutuhkan untuk Range (a): The distance at which the semi-
pemodelan. variogram reaches the sill value. Presumably,
Range (a): Jarak pada saat semi-variogram sample pairs are not longer correlated at
menyentuh nilai sill. Agaknya, pasangan distances beyond the range.
sampel tidak lagi berkorelasi pada jarak di luar Sill (Cn): The value of the semi-variogram
range. when evaluated at any distance greater than
Sill (Cn): Nilai dari semi-variogram yang jika or equal to the range.
dievaluasi ke berbagai arah, nilainya sama
atau lebih besar dari nilai range. /
5.4.1 Pembuatan Blok Model Kosong / 5.4.1 Build Empty Block Model
Blok model dikembangkan menggunakan The block models have been developed using
perangkat lunak Micromine. Micromine software.
Blok model 3 dimensi dibuat untuk semua Three dimensional block models were
endapan menutupi keseluruhan interpretasi constructed for all deposits, covering all the
domain mineralisasi. interpreted mineralized domains
Beberapa faktor yang perlu diperhatikan dalam Some factors to consider when determining
menentukan ukuran blok adalah : the block size are :
Kerapatan Pengeboran Pilih nilai Drilling Density Choose a value
sekitar seperempat hingga seperlima around one-quarter to one-fifth of the
dari rata-rata spasi bor. average drill spacing.
Variabilitas Pilih ukuran blok yang Variability Choose a block size that
cukup mewakili variasi mineralisasi adequately represents the variation of
Proporsi Mineralisasi Ukuran Blok mineralization.
harus merefleksikan kemenerusan Proportions of Mineralisation If the
mineralisasi, apakah kemenerusan along-strike continuity of mineralization
lebih dominan searah strike atau is considerably greater than the down-
searah dip. dip continuity, the block size should
Ukuran Blok Pemilihan angka reflect this matter.
dimensi blok sebaiknya bulat dan Numeric convenience Choose block
sederhana, seperti kelipatan 2, 5, atau dimensions that are numerically simple,
10. such as multiple of 2, 5, or 10.
Penentuan blok induk juga The parent blocks size was determined
mempertimbangkan jenis dan dimensi dari considering the style and dimension of the
tubuh bijih dan variografi. orebody and variography. Blocks should be
Ukuran blok harus mewakili distribusi kadar small enough to represent the distribution
dan kualitas ketersediaan data. grade, and large enough to reflect the quality
Informasi yang diinterpolasikan kedalam blok of the available data. The attributes coded into
model antara lain nama domain mineralisasi, the block models included interpreted
tingkat oksidasi, kadar, dan densitas. mineralized domain, oxidation, grades and
bulk density. Each block was sub-blocked with
Untuk memperoleh perhitungan volume yang
lebih akurat khususnya di sekitar batas model a specified ratio to obtain more accurate
wireframe maka dilakukan metoda sub volume estimate, especially around the model
blocking, ukuran sub-blok tergantung pada boundaries.
dimensi mineralisasi. /
Menggunakan nilai dua pertiga dari Using two-third of the search ellipsoid
search ellipsoid adalah teknik yang is a common technique for the first
umum digunakan untuk menentukan interpolation run, which often
run pertama interpolasi, yang mewakili represents the highest resource
kategori sumber daya tertinggi. / category
Proses perhitungan dilakukan dalam 3 tergantung tingkat pemahaman
tahap. Setiap tahap dilakukan 3 run tentang proyek. /
yang berbeda. Sekitar setengah dari
total jumlah blok akan diinterpolasi Estimation process normally
pada run pertama, kemudian 2 run conducted in 3 different steps. Each
berikutnya akan menginterpolasi kadar step occupied 3 different RUN values.
blok sisanya. Secara umum, run Around half of the blocks will be
pertama dapat diklasifikasikan sebagai interpolated at the first RUN, another 2
sumberdaya terukur, run kedua RUN remains will be needed in order
sebagai sumberdaya terunjuk, dan run to interpolate grade for the remaining
ketiga sebagai sumberdaya tereka. blocks. Commonly, first RUN could be
Klasifikasi ini sifatnya fleksibel classified as MEASURED resource,
Berikut ini beberapa petunjuk dalam metoda Here is some hint for interpolating methods:
interpolasi: /
Gunakan metoda klasik jika: Distribusi / Use a classical method if: the data
data normal dengan nilai koefisien are normally distributed with a low
variasi rendah, Tipe endapan sangat CoV; the deposit is too complex for
kompleks bilan menggunakan geostatistics
geostatistik.
Gunakan metoda geostatistik jika: Kita / Use a geostatistical method if: we
perlu memahami kemenerusan kadar need to understand the grade
endapan, Data mengandung populasi continuity within the deposit; the data
yang bercampu atau non-normal, contains mixed or non-normal
Terdapat efek proporsional. population; proportional effect is
present.
Selalu gunakan jumlah minimum 2 / Always set the minimum number of
lubang, untuk menghindari efek holes to 2 to avoid “spotted dog” grade
“spotted dog” pada proses interpolasi interpolations and classifications.
kadar dan klasifikasi.
Interpolasi hanya dilakukan pada blok induk, Interpolate parent block only so the sub-
hal ini dilakukan agar sub-blok memiliki bobot blocks at the wireframe edge have the same
yang sama dengan blok induk nya. grade as their original parent block.
continuity. Although sample locations they are still too widely spaces to
are close enough to assume continuity confirm it.
Terukur sifat, kualitas, dan Measured the nature, quality, and
distribusi data cukup untuk distribution of data are sufficient to
meyakinkan bahwa tonase dan kadar leave no reasonable doubt that the
mineralisasi dapat diperkirakan tonnage and grade of mineralization
dengan tepat. Lokasi sampel berjarak can be estimated precisely. Sample
cukup dekat untuk konfirmasi geologi locations are spaced closely enough to
dan kemenerusan kadar./ confirm geological and grade
continuity.
Perhitungan sumberdaya diklasifikasikan The resource estimate is classified according
sesuai dengan pedoman kode JORC yang to the guidelines of the JORC Code which
didasarkan pada hal berikut: / based on the following combination inputs:
Jarak antar titik bor / The drill hole spacing
Tingkat kepercayaan dalam The confidence in geological
interpretasi geologi / interpretation.
Tahapan perhitungan yang dilakukan / The number of estimations passes
Jumlah conto yang digunakan dalam The number of samples used in
perhitungan blok. /Kemenerusan estimate blocks.Local continuity
setempat yang jelas terlihat dari apparent from geological interpretation
interpretasi geologi dan variografi/. and variography.
Geologist yang melakukan pemodelan harus Geologist which conducted modelling should
memiliki pengalaman yang relevan dalam tipe have relevant experience in their commodity
komoditi dan deposit yang sedang di type and deposit.
kerjakan. /
Secara teratur audit harus dilakukan terhadap Regular audits shall be undertaken of persons
karyawan yang menerapkan prosedur ini. / applying this procedure.