Oleh :
Doni Hermansah, S.Pd.T
BLOK SILINDER
Terdiri atas
beberapa lubang
silinder yang
dilapisi dgn.
silinder liner
(pelapis silinder)
Terdapat mantel
pendingin
(water jacket)
SILINDER LINER
• Tipe Basah • Tipe Kering
BENTUK BLOK SILINDER
BENTUK BLOK SILINDER
BENTUK BLOK SILINDER
BENTUK BLOK SILINDER
BENTUK BLOK SILINDER
FRONT WHEEL DRIVE
REAR WHEEL DRIVE
Suzuki APV
THREE CYLINDER ENGINE
FOUR CYLINDER ENGINE
FLAT/OPPOSIDE/PANCAKE ENGINE
FIVE CYLINDER ENGINE
SLANT ENGINE
V-4 ENGINE
PEMERIKSAAN BLOK SILINDER
10 mm
Tengah
10 mm
Contoh : Toyota 5 K, 7 K
Standard 80,500 – 80,510 mm
Diameter maksimum :
Standard 80,728 mm
• D = Diameter piston
• C = Celah piston
= 0,040 – 0,060 mm
• H = Ukuran untuk penghalusan
= 0,020 atau kurang
Mereamer Blok Silinder
• Apabila
keausannya
kurang dari 0,2
mm, tonjolan
pada bagian
atas silinder
dibersihkan
dengan reamer
Ukuran Blok Silinder
• Tanda 1, 2, dan
3 menunjukkan
ukuran
diameter
standar
Keausan Silinder Liner
• Pressure of piston rings against
cylinder wall
• Amount of water condensed in
cylinder
• Temperature of operation
• Degree of lubrication
• Kind of lubricant
• Type of fuel being used
• Type of service in wich engine is
operated
• Amount of abrasive in lubricant
and in the combustible fuel
drawn into cylinder from
carburetor
• Length of time since engine was
last in operation