Anda di halaman 1dari 2

SPUN PILE FELL DOWN & BROKEN

Date: Friday, 20 September 2021 Time: 10;05 AM (Balikpapan Time) Location: Area 35

BRIEF DESCRIPTION
On September 20th 2021, PT. ETI for piling works
package #3 working at area 35 for piling work.
Around 10.00 AM, PT. ETI Pile #3 continue to pile the
middle part of spun pile after bottom part finish for joint
the pile. When lifting the middle spun pile to setting into
the diesel hammer cap, suddenly the snatch block
broken and the spun pile material fell down and broken
as picture attached.
No Injury person in this case.

LESSON LEARNED
DO
➢ Ensure all of crane part has been inspected properly
IMMEDIATE CAUSE ➢ Daily pre use checklist conducted by operator and
❑ Defective tools / equipment
helper
❑ Guard not use
➢ Regular inspection by competent person for lifting
❑ Modification of lifting gear
part
➢ Proper maintenance and recorded.

DON’T
➢ Do not modification to equipment including all the
ROOT CAUSE parts of equipment
❑ Lack of maintenance
➢ Do not use any equipment without proper inspection
❑ Lack of inspection
certificate from 3rd party
➢ Do not use uncertified lifting gears
RDMP Balikpapan JO #26071-100-GPI-GHX-00071
SPUN PILE JATUH DAN RUSAK
Hari: Jumat, 20 September 2021 Waktu: 10;05 WITA (Balikpapan Time) Lokasi: Area 35

BRIEF DESCRIPTION
Pada 20 September 2021, PT. ETI spun pile untuk
pekerjaan paket #3 bekerja dia area 35 untuk aktifitas
pemancangan.
Sekitar pukul 10.00 pagi, PT. ETI Pile #3 melanjutkan
pemancangan dengan mengangkat spun pile bagian
tengah setelah selesai memancang spun pile bagian
bawah untuk disambung. Ketika mengangkat spun pile
bagian tengah untuk dimasukkan ke topi diesel hammer,
tiba tiba pulley block rusak sehingga material spun pile
jatuh dan rusak..

LESSON LEARNED
DO
➢ Pastikan semua bagian derek telah diperiksa dengan
IMMEDIATE CAUSE benar
➢ Daftar periksa pra-penggunaan harian yang dilakukan
❑ Peralatan atau bagian oleh operator dan pembantu
➢ Pemeriksaan rutin oleh orang yang kompeten untuk
peralatan yang rusak
mengangkat
❑ Pelindung tidak digunakan ➢ Pemeliharaan yang tepat dan dicatat
➢ Memasang barricade dan sign board saat pekerjaan piling
❑ Modifikasi peralatan
sedang berlangsung
angkat
DON’T

ROOT CAUSE
➢ Jangan modifikasi peralatan termasuk semua bagian
peralatan
➢ Jangan menggunakan peralatan apa pun tanpa sertifikat
❑ Kurangnya perawatan inspeksi yang tepat dari pihak ketiga
❑ Kurangnya inspeksi ➢ Jangan gunakan alat pengangkat yang tidak bersertifikat
➢ Jangan melewati barricade saat pekerjaan piling sedang
berlangsung
RDMP Balikpapan JO #26071-100-GPI-GHX-00071

Anda mungkin juga menyukai