10.3 Uji Kancing & Zipper
10.3 Uji Kancing & Zipper
Zipper
https://www.ykkfastening.com/quality/methods.html
a. SVHC (Substances of Very High Concern), ada 219 daftar bahan kimia yang dilarang atau
dibatasi: https://echa.europa.eu/web/guest/candidate-list-table
b. European Nickel Restriction (part of Annex XVII), the rate of nickel release dari bagian barang
yang bersentuhan langsung dalam waktu lama dengan kulit.
https://echa.europa.eu/documents/10162/3bbe9024-52a6-8e63-5581-e686331eb459.
c. European Azo colorants and Azo dyes Restriction (part of Annex XVII) Pewarna Azo dalam
konsentrasi yang dapat dideteksi, yaitu di atas 30 mg/kg (0,003% berat)
https://echa.europa.eu/documents/10162/bd51087b-9917-b018-69ac-d7594315e2a9
Button Test
Video Testing:
https://www.youtube.com/watch?v=w
ut1ac0PZjs
Test of Snap
& Button
https://www.ykkfastening.com/quality/methods.html
Test of Snap
& Button
Button Quality Check Point Requirement
1. Does factory conduct risk analysis of products and follow product safety guidelines during
product designing & Development, Sample making and also during Pre-production activities to
avoid any potential quality issues at later stage? Is any risk analysis technical bulletin shared
with production team? Does factory maintain the records and discuss these information at
PPM?
2. Is factory having Button pull test machine ? Is button attachment strength, rivets attachment
strength check done every 2 hours? Are standards defined and records available ?
3. All die set based trims must be strictly attached by using original die sets supplied by
trims supplier, Is this followed by factory? Is die set based attaching machine available ?
4. Die set based attaching trims such as Snaps, Rivets etc- Does supplier supply trims
based on tested mock of actual construction of product to ensure attaching strength of
trims is meeting standard in bulk?