Along with the large number of users of mobile telecommunications is very influential
on the traffic data and results in the need for handling in this case. mobile
telecommunications vendors now being continuously developed IP-based cellular technology
because the average user in the era now more use of data and increase the number of
network usage, so in this case the job opportunities that are available will be more for
handling network. However, to cope on such matters is not easy for someone to learn the
system IP-based mobile network transmission, therefore the author tried to simulate the
transmission system IP-based mobile network to be useful as learning materials engginer
young, here the author uses simulators cisco packet tracer 5.3.3, the software is able to
simulate the working system of mobile IP-based transmission such as the State of the real.
The authors use the topology in this cellular network transmission system based on
assumptions, the author does not address overall about cellular topology here discuss only
to transmission systems ranging from mobile station (MS) send information to base
transceiver station (BTS) is transmitted in such a manner until the data is sent to the Base
Station Controller (BSC).
Design of simulation of cellular transmissions in cellular network-based IP to see a
BTS can be connected with a BSC used the Test Ping and is accessible from the command
prompt in the simulator software. the simulation system design of this IP-based mobile
network standard often used by telecommunication engginer in the world of work.