Satuan Operasi II
* Prosedur untuk menentukan siklus refrigerasi kompresi
mekanis memerlukan data panas laten penguapan, panas
jenis cairan refrigeran dalam kondisi jenuh (saturated liquid)
P1
P1: tekanan refrigeran pada kondisi saturated vapor H1: entalpi pada saat refrigeran pada kondisi saturated liquid
P2: tekanan refrigeran pada kondisi saturated liquid H2: entalpi pada saat refrigeran pada kondisi saturated vapor
H3: entalpi pada saat refrigeran pada kondisi superheated vapor
PERHITUNGAN DALAM SISTEM REFRIGERASI
Q = m Cp ΔT
ton r =
(H2 - H1) M
12.000
Qc = v( H 3 − H 1)
Dalam evaporator terjadi perubahan entalpi sebagai akibat kerja dari
evaporator untuk merubah fase refrigeran dari fase cair ke fase uap jenuh
dengan cara menyerap panas dari lingkungannya yaitu sebesar H2-H1.
COP =
( H 2 − H1)
(H 3 − H 2 )
g) Kerja yang diperlukan untuk mendinginkan
P=
(H 2 − H 1)M
COP
P=
(tonr ) (12.000)
COP
P dinyatakan dalam satuan BTU/jam(tonr )
𝐵𝑒𝑟𝑎𝑡 𝑟𝑒𝑓𝑟𝑖𝑔𝑒𝑟𝑎𝑛 = 𝐾𝑎𝑝𝑎𝑠𝑖𝑡𝑎𝑠 𝑝𝑒𝑛𝑑𝑖𝑛𝑔𝑖𝑛
𝐻 −𝐻
𝑝𝑒𝑟 𝑡𝑜𝑛 𝑟𝑒𝑓𝑟𝑖𝑔𝑒𝑟𝑎𝑠𝑖
2 1
A cold storage room is being maintained at 2°C using a vapor-
compression refrigeration system that uses R-134a. The
evaporator and condenser temperatures are 10 and
40°C,respectively.
Tentukan nilai (P1 dan P2) serta (H1, H2, dan H3)
DIAGRAM MOLLIER
R-134a
A cold storage room is being maintained at 2°C using a vapor-
compression refrigeration system that uses R-134a. The
evaporator and condenser temperatures are -5 and
40°C,respectively. The refrigeration load is 20 tons. Calculate the
mass flow rate of refrigerant, the compressor power requirement,
and the C.O.P. Assume the unit operates under saturated
conditions and the compressor efficiency is 85%.
v=
(20 tons )(303852 kJ /ton )
(24 h )(3600 s /h )(296 kJ /kg - 156 kJ /kg )
= 0,502 kg / s
v( H 3 − H 2)
Qw =
=
(0,502kg / s )(327 kJ / kg − 296kJ / kg )
0,85
= 18,31kW
COP =
( H 2 − H 1)
(H 3 − H 2 )
=
(296 kJ kg − 156 kJ kg )
(327 kJ kg − 296 kJ kg )
= 4,52
TUGAS