Dosen :
Ibu Dhanny Pertamatasari P, MT
Disusun Oleh :
Miftahul Farid - 41520010191
1.1.7-packet-tracer---basic-switch-configuration---physical-mode
Instructions
Part 1: Cable the Network and Verify the Default Switch Configuration
A.
B.
How many GigabitEthernet interfaces does the switch have? 28 GigabitEthernet
What is the range of values shown for the vty lines? From 0 to 4 and From 5 to
15
C.
Why does this message appear? No configuration have been saved to NVram
D.
I.
What is the Cisco IOS version that the switch is running? 16.3.2
What is the system image filename? ”flash:/cat3k_caa-
universalk9.16.03.02.SPA.bin”
What is the base Ethernet MAC address of this switch? 00:60:2F:DE:17:2D
J.
K.
B.
C.
D.
E.
.
G.
Why is the login command required? because without the login command the
switch will not prompt for a password