“JISSO KAIZEN”
Kencangkan hose “I” Mark tidak lurus Centang “I” Mark yang
tidak lurus (sudah kencang)
3. Contoh Baik Saat Bongkar Pasang
1. Saat Pembongkaran
Tool
Parts box
Tool
Siapkan tools dan parts box Pembongkaran Simpan parts yang dibongkar
di dalam parts box
2. Saat Pemasangan Kembali Confirmation sheet of after maintenance
Bolt tightening
Bolt tightening
procedure
procedure
1. Ulir dan kepala baut harus diberi
Grease KP2K dengan hati-hati.
2. Pastikan permukaan yang bersentuhan
saat pengencangan bersih dari grease. Re-tighten the
Re-tighten the one
two
4.2 Assembly of the standard "Flange seal '
KLTD standard of assembly
Finger press.
Grease
application.
3~4point.
Grease application.
Prepare the material. Clean and check the house. Clean and check the seal. 3~4point.
Clean the finger. Finger press of seal. Oil application . Finger press.
5. “JISSO KAIZEN” Hose Hidrolik
Notes:
Hindari hose
bersentuhan dengan Improvement:
logam bersudut tajam. B.
Low pressure hose
A.
Ada risiko hose jadi rusak atau bocor!! Jarak lebih dari 15mm
Ada risiko hose jadi rusak atau bocor!! Jarak lebih dari 15mm
Ada risiko hose jadi rusak atau bocor!! Jarak lebih dari 15mm
Terima kasih.
Thank you for your cooperation.