Disampaikan pada Pelatihan Hiperkes dan Keselamatan Kerja Bagi Dokter Perusahaan
Semarang 16-21 Maret 2020
agus hadiyarto
Bahan Sisa
05/03/2020 2
1
4 Pembuangan Terkontrol
3/5/2020 3
TIPE PROSES PRODUKSI
Process
Energi
Limbah ke
lingkungan
05/03/2020 4
Bahan baku Produk
Process
Energi Waste
Treatment
Sisa limbah ke
2) Recent industrial practices lingkungan
05/03/2020 5
Energi Produk
Catatan :
Jika bahan sisa dimanfaatkan oleh pihak lain , dikenal dengan istilah Off site recycle
05/03/2020 6
Gas dan Partikulat
Getaran Bahan
Sisa
Suara
/Limbah
Industri
Padat - Cair
05/03/2020 7
Bahan baku Produk
Process Residuals
Energi Residual
3R Reprocess
ProcessResikel
Produk 3R
samping
Resikel
05/03/2020 8
PRE TREATMENT
SECONDARY TREATMENT
(BIOCHEMICAL TREATMENT)
ADVANCE TREATMENT
(TERTIARY TREATMENT)
05/03/2020 9
PRE TREATMENT
05/03/2020 10
Ekualisasi
Bak Ekualisasi
05/03/2020 11
Netralisasi Limbah & Pemisahan Minyak
Oil Trap
Netralisasi
05/03/2020 12
Tanaman
estetis
B3 Non B3
05/03/2020 13
PRIMARY TREATMENT
(Pengendapan Secara Fisik dan Kimia)
Tujuannya memisahkan padatan yang terdapat di limbah cair
dengan airnya
• Langsung diendapkan manakala padatan tersuspensinya
mudah mengendap (settleable solid)
• Tidak langsung diendapkan bila padatan tersuspensinya tidak
mudah mengendap (non settleable solid). Untuk itu perlu
penambahan bahan kimia koagulan
05/03/2020 14
Pengendapan secara Fisik
05/03/2020 15
Pengendapan secara Kimia lewat Proses
Koagulasi dan Flokulasi
Penambahan bahan kimia ke dalam limbah cair,
bereaksi membentuk hidroksida, berikatan dengan
partikel koloid.
05/03/2020 16
Bahan kimia
Saringan Tanki Pengendap
Air Limbah
Campur
Cepat Tanki
Flokulasi
Lumpur
05/03/2020 17
CLARIFIER
Perrys p 25-66
koagulan
Koagulasi Flokulasi
rpm > 100 rpm < 1
koloid
05/03/2020 18
- - partikel koloid yang stabil umumnya
- bermuatan negatif (0.001 - 1 m)
-- (clay; organic,bakteri, virus, algae)
- Clay :hidropobik – non metalik
Organic : hidropilik – COOH, -NH2, sulfonik
- +
+ +
+ +
+ +
+ + +
++ + + +
+ + +
+ ++
+ + ++ + +
+ + ++ +
++
+
Micro floc yang tidak stabil + +
+
Koagulasi dan flokulasi
Macrofloc tidak stabil
Elektrokinetik reduksi zeta potensial (k) (1 - 100 m)
Perikinetik gerak Brown (f)
Orthokinetik agitasi (k)
05/03/2020 19
Reaksi Tawas
05/03/2020 20
Reaksi Ferri Chlorida dan Ferri sulfat
05/03/2020 21
Reaksi Ferri Chlorida dan Ferri sulfat
05/03/2020 22
Pengolahan Kimia (Desinfeksi)
05/03/2020 23
AOPs (Advanced Oxidation Processes)
05/03/2020 24
Hidroksil-UVP (Ultraviolet Peroksida) &
Hidroksil-OZP (Ozon Peroksida)
05/03/2020 25
05/03/2020 26
Sumber : Dr. Anto Tri Sugiarto, MEng
05/03/2020 27
PENGOLAHAN BIOKIMIA
05/03/2020 28
Perbandingan cara menghilangkan senyawa organik
(Eckenfelder, 1989)
Biodegradasi dan
Biodegradasi Stripping Refraktori (Sorption)
Stripping
Nitrobenzen Ethyl acetate 1,2 Dichlorethane Bis(2-ethyllhexyl)
2,4 Dichlorbenzene Benzene 1,1,1 Trichlorethane phthalate
1,1,2,2, Tetrachlor
2,4 Dinitrobenzene 1,2 Dichlorbenzene
ethane
Acrolein Methylen chloride 1,2 Dichlorpropane
Acrylonitrile Toluene Trichloroethylene
Pentachlorophenol Ethylbenzene
Phenol Chloroform
Carbon
Phenanthrene
tetrachlorida
Naphthalene
Benzidine
05/03/2020 29
Nutrien spesifik yang digunakan untuk oksidasi biologis
(Eckenfelder, 1992)
N 5 x 10-2 Mg 30 x 10-4
P 1 x 10-2 Mo 43 x 10-5
Fe 12 x 10-3 Zn 16 x 10-5
Ca 62 x 10-4 Cu 15 x 10-5
K 45 x 10-4 Co 13 x 10-5
05/03/2020 30
Biological Treatment Process (1)
05/03/2020 31
Biological Treatment Process (2)
3. Ponds/Lagoons
• Aerated , Facultatif, Anaerobic
4. Anaerobic treatment
• Anaerobic Digestion
• UASB process
05/03/2020 32
Ciri Umum Proses Pengolahan Limbah Organik
Secara Biokimia/Bioremediasi
Aerob Anaerob
• Untuk limbah organik • Untuk organik sederhana
sederhana maupun kompleks
• Butuh oksigen (O2) • Tidak butuh oksigen (O2)
• Menghasilkan biomassa • Menghasilkan biomassa
dalam jumlah besar (66%) dalam jumlah sedikit
• Menghasilkan air, gas, asam (5-20%)
organik (34%) • Menghasilkan air, asam
• Tidak berbau busuk (CO2, organik, VOC, gas dalam
H2O, NO3, PO4, SO4), sedikit jumlah besar (80-95%)
kecut • Umumnya berbau busuk
(H2S, NH3) dan kecut.
05/03/2020 33
MIKROORGANISME
• AEROB : BUTUH O2
05/03/2020 35
Bakteri
Acinetobacter, Arthrobacter, Achromobacter,
Alcaligenes, Bacilles, Citromonas,
Chromobacterium, Flavobacterium, Flexibacter,
Micrococcus, Pseudomonas dan Zooglea.
05/03/2020 36
Hasil Dekomposisi Reaksi Biokimia
aerob dan atau anaerob
Intermediate product
(Asam organik, alkohol, aldehid, ester)
End product
(CO2, H2O, CH4, H2S, NH3, N2, H2)
05/03/2020 37
Anaerobic Digester
05/03/2020 38
PENGOLAHAN LIMBAH CAIR
Limbah
Desinfeksi Pengendap 2
05/03/2020 39
Sumber : https://www.youtube.com/watch?v=yFqQJR5eBoc
Membrane Bio Reactor = MBR
KONFIGURASI PROSES MBR
Side
Stream
Submerge
d
Tanaman estetis
Kerikil
Fitoremediasi
05/03/2020 43
Kolam Fitoremediasi
05/03/2020 44
Komplementer
05/03/2020 45
LIMBAH PADAT
05/03/2020 46
Limbah Padat Konvensional
05/03/2020 47
Type of composting
O2
Uniform Mixture of
Composting
Organic Matter Vessel Humified
Inorganic Nutrients Organic Matter
Water Minerals,
Water and
Microorganisms
Microorganisms
05/03/2020
O2 Source : Danielle Aslam, M.S
50
Anaerobic Composting
Intermediate Compounds
(e.g., VOAs, H2S)
Heat Methane,
Water
CH4
CO2
Raw Materials Finished Compost
Uniform Mixture of
Composting Humified
Organic Matter Vessel
Inorganic Nutrients Organic Matter
Water Minerals,
Water and
Microorganisms
Microorganisms
O2
Methane and other greenhouse gases can be
05/03/2020 51
trapped and used for fuel (anaerobic digestion)
Municipal Solid Waste
Incineration
05/03/2020 52
Combustion Types
• Pyrolysis
• Gasification
• Incineration (energy recovery through complete
oxidation)
– Mass Burn
– Refuse Derived Fuel
• Plasma arc (advanced thermal conversion)
05/03/2020 53
The combustion process
• occurs as the volatile products and some of
the char reacts with oxygen to primarily form
carbon dioxide and small amounts of carbon
monoxide, which provides heat for the
subsequent gasification reactions
• Letting C represent a carbon-containing
organic compound, the basic reaction here is
05/03/2020 54
Pyrolysis (devolatilization process)
• Thermal degradation of
carbonaceous materials
• Lower temperature
(200-300°C) than gasification
• Absence or limited oxygen
• Products are gas up to 70%
(volatiles are released), liquid,
solid (char)
• Distribution of products
depends on temperature
05/03/2020 55
Gasification
• Partial oxidation process using
air, pure oxygen, oxygen
enriched air, or steam
• Carbon converted into syngas
(CO + H2)
– CH4 + H2O → CO + 3 H2
– CO + H2O → CO2 + H2
• More flexible than incineration
• More public acceptance
05/03/2020 56
Flexibility of Gasification
05/03/2020 57
Incineration
• is a waste treatment process that involves the
combustion of organic substances contained in waste
materials.
• Incineration and other high-temperature waste
treatment systems are described as "thermal
treatment".
05/03/2020 58
Incineration (continue)
• Incineration of waste materials converts the waste
into ash, flue gas, and heat.
• The ash is mostly formed by the inorganic
constituents of the waste, and may take the form of
solid lumps or particulates carried by the flue gas.
• The flue gases must be cleaned of gaseous and
particulate pollutants before they are dispersed into
the atmosphere.
• In some cases, the heat generated by incineration
can be used to generate electric power.
05/03/2020 59
Incineration (continue)
• An incinerator is a furnace for burning waste.
Modern incinerators include pollution mitigation
equipment such as flue gas cleaning.
• There are various types of incinerator plant design:
moving grate, fixed grate, rotary-kiln, and fluidised
bed.
05/03/2020 60
Incineration (continue)
• According to the European Waste Incineration
Directive, incineration plants must be designed to
ensure that the flue gases reach a temperature of at
least 850 °C (1,560 °F) for 2 seconds in order to
ensure proper breakdown of toxic organic
substances. In order to comply with this at all times,
it is required to install backup auxiliary burners
(often fueled by oil), which are fired into the boiler in
case the heating value of the waste becomes too low
to reach this temperature alone.
05/03/2020 61
Incineration (continue)
• The flue gases are then cooled in the
superheaters, where the heat is transferred to
steam, heating the steam to typically 400 °C
(752 °F) at a pressure of 40 bars (580 psi) for
the electricity generation in the turbine. At
this point, the flue gas has a temperature of
around 200 °C (392 °F), and is passed to the
flue gas cleaning system
05/03/2020 62
Waste Incineration - Advantages
• Volume and weight reduced (approx. 90% vol. and 75% wt
reduction)
• Waste reduction is immediate, no long term residency
required
• Destruction in seconds where LF requires 100s of years
• Incineration can be done at generation site
• Air discharges can be controlled
• Ash residue is usually non-putrescible, sterile, inert
• Small disposal area required
• Cost can be offset by heat recovery/sale of energy
05/03/2020 63
Environmental Considerations
• Tonne of waste creates 3.5 MW of energy (eq.
to 300 kg of fuel oil) powers 70 homes
• Biogenic portion of waste is considered CO2
neutral (tree uses more CO2 during its lifecycle
than released during combustion)
• Should not displace recycling
05/03/2020 64
Waste Incineration - Disadvantages
• High capital cost
• Skilled operators are required (particularly for boiler
operations)
• Some materials are noncombustible
• Some material require supplemental fuel
• Public disapproval
Risk imposed rather than voluntary
Incineration will decrease property value (perceived not necessarily
true)
Distrust of government/industry ability to regulate
05/03/2020 65
Three T’s
Temperature
• The temperature must be high enough to ensure
effective drying, degasification and fuel combustion.
Turbulence
• The mixture of air and inflammable gases must be
optimal.
Time
• Gasses must have the time necessary for burning out
before they are cooled by the boiler water
05/03/2020 66
05/03/2020 67
Limbah : Padat (B3) & Radioaktif
• Limbah Padat B3 , untuk pengelolaannya dapat mengacu :
Peraturan Pemerintah No. 18 Tahun 1999 Tentang
Pengelolaan Limbah Bahan Berbahaya Dan Beracun .
• Limbah Radioaktif, dikelola sesuai PPRI No 27 Tahun 2002
Tentang Pengelolaan Limbah Radioaktif
05/03/2020 68
Klasifikasi Limbah Padat B3
05/03/2020 69
1. Limbah Berbahaya
• Secara umum yang disebut limbah adalah bahan sisa yang dihasilkan dari suatu kegiatan
dan proses produksi, baik pada skala rumah tangga, industri, pertambangan, dan
sebagainya.
• Bentuk limbah tersebut dapat berupa gas dan debu, cair atau padat. Di antara berbagai
jenis limbah ini ada yang bersifat beracun atau berbahaya dan dikenal sebagai limbah
Bahan Berbahaya dan Beracun (Limbah B3).
• Suatu limbah digolongkan sebagai limbah B3 bila mengandung bahan berbahaya atau
beracun yang sifat dan konsentrasinya, baik langsung maupun tidak langsung, dapat
merusak atau mencemarkan lingkungan hidup atau membahayakan kesehatan manusia.
• Yang termasuk limbah B3 antara lain adalah bahan baku yang berbahaya dan beracun yang
tidak digunakan lagi karena rusak, sisa kemasan, tumpahan, sisa proses, dan oli bekas
kapal yang memerlukan penanganan dan pengolahan khusus.
• Bahan-bahan ini termasuk limbah B3 bila memiliki salah satu atau lebih karakteristik
berikut: mudah meledak, mudah terbakar, bersifat reaktif, beracun, menyebabkan infeksi,
bersifat korosif, dan lain-lain, yang bila diuji dengan toksikologi dapat diketahui termasuk
limbah B3.
05/03/2020 70
Jenis Limbah Berbahaya
• Limbah mudah meledak adalah limbah yang melalui reaksi kimia dapat menghasilkan
gas dengan suhu dan tekanan tinggi yang dengan cepat dapat merusak lingkungan.
• Limbah mudah terbakar adalah limbah yang bila berdekatan dengan api, percikan api,
gesekan atau sumber nyala lain akan mudah menyala atau terbakar dan bila telah
menyala akan terus terbakar hebat dalam waktu lama.
• Limbah reaktif adalah limbah yang menyebabkan kebakaran karena melepaskan atau
menerima oksigen atau limbah organik peroksida yang tidak stabil dalam suhu tinggi.
• Limbah beracun adalah limbah yang mengandung racun yang berbahaya bagi manusia
dan lingkungan. Limbah B3 dapat menimbulkan kematian atau sakit bila masuk ke
dalam tubuh melalui pernapasan, kulit atau mulut.
• Limbah penyebab infeksi adalah limbah laboratorium yang terinfeksi penyakit atau
limbah yang mengandung kuman penyakit, seperti bagian tubuh manusia yang
diamputasi dan cairan tubuh manusia yang terkena infeksi.
• Limbah yang bersifat korosif adalah limbah yang menyebabkan iritasi pada kulit atau
mengkorosikan baja, yaitu memiliki pH ≤ 2,0 untuk limbah yang bersifat asam dan lebih
besar dari 12,5 untuk yang bersifat basa.
05/03/2020 71
• Kemampuan untuk terbakar
– Titik nyala kurang dari 600C, dalam bentuk non-cairan yang secara
spontan terbakar atau
– dapat dibakar dengan adanya gesekan atau penyerapan kelembaban
pada suhu lingkungan, dalam bentuk gas bertekanan, dan
– dalam bentuk padatan yang terbakar dengan adanya oksigen di
atmosfer dan
– melepaskan sejumlah besar energi.
– Contohnya antara lain adalah alkohol (≥ 24% volume), serbuk halus
besi, nikel, dan aluminum, benzoil peroksida, potasium nitrat
• Daya korosivitas
– Bentuk dapat berupa cairan, gas, atau padatan yang dapat
menunjukkan sifat-sifat larutan dengan pH ≤ 2 atau ≥ 12,5.
– Contohnya antara lain larutan asam dengan pH ≤ 2, larutan alkali
dengan pH ≥ 12,5, larutan feri khlorida, padatan soda kostik.
05/03/2020 72
Daya reaktifitas
• Cairan, gas, atau padatan bereaksi sangat cepat dengan air,
• membentuk campuran yang sangat eksplosif dengan air,
• umumnya tidak stabil dan cepat mengalami perubahan tanpa ledakan,
• membangkitkan gas-gas beracun, uap atau kabut membahayakan
kesehatan manusia atau lingkungan jika bercampur dengan air atau bahan
kimia lain seperti asam.
• Contoh : adalah senyawa nitro, litium hidrida, logam sodium, dan lain-lain.
Tingkat keracunan
• Berupa cairan, gas, atau padatan yang menunjukkan sifat-sifat
karsinogenik, mutagenik, atau teratogenik,
• Menyebabkan efek kesehatan akut atau kronis.
• Mengandung konstituen berbahaya di atas nilai ambang batas,
• beracun terhadap binatang uji baik lewat oral, dermal, atau pernafasan,
• beracun terhadap kehidupan perairan,
• mengandung senyawa karsinogen di atas nilai ambang batas.
• Contoh : air yang melarutkan logam-logam berat seperti nikel atau perak,
pelarut khlorinasi atau non-khlorinasi, pestisida, pendingin dengan atau
tanpa logam atau oli, limbah oli.
05/03/2020 73
2. Limbah Berkadar Rendah (Low Level Waste)
Mengandung komponen radioaktif berkadar rendah yang tidak
memenuhi definisi limbah transuranik dan tidak mengandung
komponen seperti yang telah dipersyaratkan.
Contoh yang banyak digunakan adalah unsur berylium atau minyak
yang terkontaminasi komponen radioaktif.
05/03/2020 74
3. Limbah Transuranik (TRU Waste)
Limbah padat yang terkontaminasi oleh sinar alfa dari emisi
radionuklida transuranium dengan waktu paruh lebih dari 20 tahun
dan konsentrasi lebih besar dari 100 nCi per gram (100 nCi/g).
Radionuklida transuranik adalah radionuklida yang mempunyai nomor
atom lebih besar dari 92.
Bahan-bahan yang mengandung radionuklida transuranik harus diberi
label sebagai limbah radioaktif.
Limbah yang terkontaminasi radionuklida transuranik atau dengan
radionuklida transuranik dan bahan berhaya diatur agar tidak dicampur
tetapi hanya sebagai radionuklida transuranik.
05/03/2020 75
4. Limbah Campuran (Mixed Waste)
05/03/2020 76
5. Limbah Tak Berbahaya (Nonhazardous Waste)
– Limbah industri tak berbahaya (Nonhazardous industrial waste)
• Limbah industri dapat mengandung konstituen berbahaya
yang masih di bawah nilai ambang batas akan tetapi sudah
melampaui nilai batas untuk dibuang badan air.
– Limbah permukiman tak berbahaya (Nonhazardous municipal
waste)
• Limbah permukiman seperti kertas, karton, bahan makanan
dan kemasan, dan keranjang dapat dibuang langsung di
Tempat Pembuangan Akhir
05/03/2020 77
6. Limbah Khusus (Special Waste)
• Mungkin memerlukan pengecekan atau modifikasi untuk memenuhi aturan yang
ada. Limbah ini mempunyai penanganan dan pengepakan yang khusus untuk
memenuhi kriteria yang ada.
• Termasuk bahan-bahan ini adalah:
– bahan-bahan berharga (accountable materials), tabung lampu (fluorescent tubes &
ballasts), uap asam (fuming acids), silinder gas, filter HEPA, limbah medis, asam nitrat,
bahan pembentuk peroksida, PCBs, limbah selokan (sewer waste), bahan-bahan
berpelindung (shielded items)
• Limbah tidak dapat diterima jika memenuhi kategori berikut :
– limbah yang bereaksi atau melepaskan konstituen berbahaya pada laju yang
membahayakan untuk disimpan atau dipindahkan
– eksplosif
– gas bertekanan
– limbah dari produk yang tidak sempurna
– limbah rusak dalam kemasan
– sangat berbahaya/beracun akut yang melebihi BM untuk setiap kontainer
– limbah tidak dapat diidentifikasi atau tidak lengkap karakteristiknya
– Limbah radioaktif yang melebihi batas aktifitas yang diperkenankan tiap kontainer
05/03/2020 78
05/03/2020 79
05/03/2020 80
Cara mengolah limbah padat B3
Operasi/Proses Perlakuan Jenis limbah Ujud limbah
Physical treatment
Adsorption Se 1,2,3,4 L
Aeration Se 1,2,3,4,5 L
Ammonia stripping VR, Se 1,2,3,4 L
Carbon sorption VR, Se 1,2,3,4,5 L,G
Encapsulation St 1,2,3,4,5,6 L,S
Chemical treatment
Calcination VR 1,2,5 L
Chemical dechlorination De 1,3 L
Ion Exchange VR, Se, De 1,2,3,4,5 L
Thermal treatment
Incineration VR, De 3,5,6,7 S,L,G
Pyrolisis VR, De 3,4,6 S,L,G
Biological Treatment
Activated Sludge De 3 L
Aerated lagoons De 3 L
Anaerobic Digestion De 3 L
Anaerobic Filter De 3 L
Trickling Filter De 3 L
Waste Stabiliozation Ponds De 3 L
05/03/2020 81
LIMBAH GAS-PARTIKULAT
05/03/2020 82
Klasifikasi Polutan
1. Asalnya
a. Primary. Emitted to the atmosphere from a process
b. Secondary. Formed in the atmosphere as a result of a chemical reaction
2. Ujudnya
a. Gaseous. True gases such as sulfur dioxide, nitrogen oxide,ozone, carbon
monoxide, etc.; vapors such as gasoline, paint solvent, dry cleaning agents,
etc.
b. Particulate. Finely divided solids or liquids; solids such as dust, fumes, and
smokes; and liquids such as droplets, mists, fogs, and aerosols
05/03/2020 83
Polutan Gas Anorganik
1. Sulfur gases. Sulfur dioxide, sulfur trioxide, hydrogen sulfide
2. Oxides of carbon. Carbon monoxide, carbon dioxide
3. Nitrogen gases. Nitrous oxide, nitric oxide, nitrogen dioxide, other nitrous
oxides
4. Halogens, halides. Hydrogen fluoride, hydrogen chloride,chlorine, fluorine,
silicon tetrafluoride
5. Photochemical products. Ozone, oxidants
6. Cyanides. Hydrogen cyanide
7. Ammonium compounds. Ammonia
8. Chlorofluorocarbons. 1,1,1-trichloro-2,2,2-trifluoroethane;
trichlorofluoromethane, dichlorodifluoromethane;
chlorodifluoromethane; 1,2-dichloro-1,1,2,2-tetrafluoroethane;
chloropentafluoroethane
05/03/2020 84
Polutan Uap Organik
1. Hydrocarbons
a. Paraffins. Methane, ethane, octane
b. Acetylene
c. Olefins. Ethylene, Butadiene
d. Aromatics. Benzene, toluene, benzpyrene, xylene, styrene
05/03/2020 85
Teknologi Pengendalian Pencemaran Gas
• Absorpsi
– Packed columns (continuous operation)
– Plate columns (staged operations)
• Adsorpsi
– Physical and Chemical Adsorption
• Kombusi
– Flares
– Thermal incinerators
– Catalytic incinerators.
• Kondensasi
– Surface Condensor
– Contact Condensor
• Biofilter
05/03/2020 86
05/03/2020 87
05/03/2020 88
05/03/2020 89
05/03/2020 90
05/03/2020 91
05/03/2020 92
05/03/2020 93
05/03/2020 94
Pengendalian Partikulat
05/03/2020 95
05/03/2020 96