AUTOCAD 2D LANJUTAN
(RASENGAN - RAK SEPATU DENGAN TIMBANGAN)
Command: Specify opposite corner or Specify second point or <use first point as
[Fence/WPolygon/CPolygon]: *Cancel* displacement>:
Command: DIMLINEAR
Command:
Specify base point or [Displacement/mOde] Specify second point or <use first point as
<Displacement>: displacement>:
Specify second point or <use first point as Specify next point or [Undo]: *Cancel*
displacement>:
Command:
Command: LINE
Command:
Specify first point:
Command: Specify opposite corner or
Specify next point or [Undo]: 18 [Fence/WPolygon/CPolygon]:
Command: Command:
1 found Command:
Command: Command:
Command: Command:
10 found Command:
Command: Command:
Command: Command:
Command: Command:
Command: Command:
Command: Command:
Command: [cuTting
edges/Crossing/mOde/Project/eRase/Undo]:
Command: *Cancel*
Specify next fence point or [Undo]:
Command:
Specify next fence point or [Undo]:
Command:
Specify next fence point or [Undo]:
Command:
Specify next fence point or [Undo]:
Command:
Select object to trim or shift-select to extend or
Command: Specify opposite corner or
[Fence/WPolygon/CPolygon]: [cuTting
edges/Crossing/mOde/Project/eRase/Undo]:
Command:
Select object to trim or shift-select to extend or
Command: Specify opposite corner or
[Fence/WPolygon/CPolygon]: [cuTting
edges/Crossing/mOde/Project/eRase/Undo]:
Window Lasso Press Spacebar to cycle options
Select object to trim or shift-select to extend or
Command:
[cuTting
Command: edges/Crossing/mOde/Project/eRase/Undo]:
Specify second point or [Array] <use first point Select grip to edit array or [ASsociative/Base
as displacement>: point/COUnt/Spacing/COLumns/Rows/Levels/e
Xit]<eXit>:
Specify second point or [Array/Exit/Undo]
<Exit>: *Cancel* Select grip to edit array or [ASsociative/Base
point/COUnt/Spacing/COLumns/Rows/Levels/e
Command: REC Xit]<eXit>:
RECTANG Select grip to edit array or [ASsociative/Base
point/COUnt/Spacing/COLumns/Rows/Levels/e
Specify first corner point or
Xit]<eXit>:
[Chamfer/Elevation/Fillet/Thickness/Width]:
Automatic save to
Specify other corner point or
C:\Users\User\AppData\Local\Temp\Drawing2_1
[Area/Dimensions/Rotation]: *Cancel*
_1049_e0a465d2.sv$ ...
Command: POLYLINE
Command:
PLINE
Command:
Specify start point:
Command:
Current line-width is 0.00
Command:
Specify next point or
Command: _erase 1 found
[Arc/Halfwidth/Length/Undo/Width]:
Command: Specify opposite corner or
Specify next point or
[Fence/WPolygon/CPolygon]:
[Arc/Close/Halfwidth/Length/Undo/Width]: 3
Command: _.erase 1 found
Specify next point or
[Arc/Close/Halfwidth/Length/Undo/Width]: Command:
Specify next point or Command: COPY
[Arc/Close/Halfwidth/Length/Undo/Width]:
1 found
Specify base point or [Displacement/mOde] Specify first extension line origin or <select
<Displacement>: object>:
Specify second point or [Array] <use first point Specify second extension line origin:
as displacement>:
Specify dimension line location or
Specify second point or [Array/Exit/Undo]
<Exit>: *Cancel* [Mtext/Text/Angle/Horizontal/Vertical/Rotated]:
Command: ** STRETCH **
Command: Command:
Command: ** STRETCH **
Command: Command:
** STRETCH ** Command:
Command: Command:
Command: MOVE
Specify second point or [Array] <use first point Specify second point or [Array/Exit/Undo]
as displacement>: <Exit>: *Cancel*
Specify dimension line location or Select objects: Specify opposite corner: 1 found,
2 total
[Mtext/Text/Angle/Horizontal/Vertical/Rotated]:
Select objects:
Dimension text = 30
Specify first point of mirror line:
Command: DIMLIN
Specify second point of mirror line:
DIMLINEAR
Erase source objects? [Yes/No] <No>:
Specify first extension line origin or <select
object>: Dimension disassociated.
Command: DIMLINEAR
Command: Specify opposite corner or Specify second point or [Array] <use first point
[Fence/WPolygon/CPolygon]: as displacement>:
Command: Command:
2 found ** STRETCH **
1 found [Mtext/Text/Angle/Horizontal/Vertical/Rotated]:
DIMLINEAR ** STRETCH **
Specify first extension line origin or <select Specify stretch point or [Base
object>: point/Copy/Undo/eXit]:
Command: ** STRETCH **
Command: Command:
** STRETCH ** DIMLINEAR
Specify stretch point or [Base Specify first extension line origin or <select
point/Copy/Undo/eXit]: object>:
[Mtext/Text/Angle/Horizontal/Vertical/Rotated]: Command:
DIMLINEAR DIMLINEAR
Specify first extension line origin or <select Specify first extension line origin or <select
object>: object>:
Specify second extension line origin: *Cancel* Specify second extension line origin:
DIMLINEAR [Mtext/Text/Angle/Horizontal/Vertical/Rotated]:
DIMLINEAR Command:
Command: `
Command: Command:
Command: Command:
Command: Command:
Command: Command:
Command: Command:
Command: Command:
Command: Command:
Command: Command:
Command: Command:
Command: Command:
Command: Command:
Command: Command:
Command: Command:
Command: Command:
Command: Command:
Command: Command:
Command: Command:
Command: Command:
Command: Command:
Command: Command:
Command: Command:
Command: Command:
Command: Command:
Command:
Command: