Anda di halaman 1dari 10

Proses Desalinasi

Reverse Osmosis
Prinsip
Menghasilkan air dengan kemurnian tinggi dengan melakukan
pemisahan kandungan padatan terlarut ion monovalen seperti NaCl
Kinerja Proses
Pemisahan

Desalinasi Air
laut
Reverse Osmosis
• All dissolved solids, organics, and gases
that do not pass through the membrane
are removed in the waste stream of RO
reject water (brine water)
• Sufficient care must be taken to protect
the membrane from deposits, which
reduce efficiency or plug the membrane
• Pretreatment may be required to achieve
an acceptable SDI (Silt Density Index)
• RO Pretreatment, Material that can
potentially foul (or plug) the membrane
will interfere with the RO process
(suspended and colloidal solids, iron,
metal oxides, scale, and biological
materials)
– SS Removal
– Iron Oxide Removal
– Scale Prevention
– Biological Fouling
Desalination PLTU Gresik dengan metode thermal

Data Teknis sebagai berikut:


Made In : PT AQUANUR-GFT deutsche BABC
INDONESIA-GERMANY
Output : 50 – 16.000 m3/d
Number of effect: 1 – 24
Specific energi of simultanneoously operated pumps
: 1.5 – 2.5 kwh/m3
Specific water consumption : 2.5 - 10.5m3 /m3
Distillate salinity : 0. 05 – 25ppm

Data-data Teknis sebagai berikut:


Made In : Sasakura Engineering CO LTD Japan
Type : Once through multi stage flash evaporation
system
Capacity : 1000 ton/day per Unit
Sistem Pengambilan air laut
PT Chandra Asri Petrochemical Tbk
Proses Thermal (Multi stage distillation)

8
Cara kerja Desalination
• Air laut dipompa oleh Sea Water Feed pump menuju tube stage
terakir menuju ke tube stage pertama terus ke Brine Heater
untuk dipanaskan dengan temperatur 96 ͦ C – 110 ͦͦ C kemu
dian masuk ke stage no 1 sampai ke stage terakir.
kemudian dipompa dengan brine blowdown pump untuk
diatur oleh brine blow down control valve selanjutnya air
laut tersebut dibuang ke laut.

• Pada waktu proses tersebut terjadi penguapan,karena


adanya vacuum uap tersebut tertarik keatas lebih cepat dan
menyentuh pipa² diatasnya yang dialiri oleh air laut yang
temperaturnya lebih dingin sehingga terjadi condensasi,
untuk menghindari carry over antara penampungan air
condensasi dengan air laut dipasang demister, hasil air
condensasi tersebut ditampung dan mengalir ke chamber
air Distilate, selanjutnya dipompa oleh distilate pump
menuju ke tanki Raw Water
• Kwalitas air Distilate dipertahan :
CL- =<1000 ppb
Conductivity =<20 us/cm
Condensate :
CL- =<1000 ppb
• Proses dibrine heater: air laut masuk di
tube² brine heater kemudian dipanaskan
oleh steam(uap) yang di dapat dari Low
Pressure Steam (temperatur yang
dimasukkan di sisi luar tube² (shell) yang
ada di Brine Heater, dari proses diatas
didapatkan air condensate yang
ditampung di chamber, kemudian
dipompa oleh Condensate pump ke Make-
Up Tank 3

Anda mungkin juga menyukai