57
Untuk sumur yang dalam dan kolom yang panjang diperlukan waktu
pemompaan yang lama, sehingga thickening time harus lebih lama. Untuk
memperpanjang atau memperlambat thickening time perlu ditambahkan retarder
kedalam suspensi semen seperti Calcium Lignosulfonat, Carboxymethyl
Hydroxyethyl Cellulose dan senyawa-senyawa asam organik.
Pada sumur-sumur yang dangkal diperlukan thickening time yang tidak
terlalu lama, karena selain target yang akan dicapai tidak terlalu jauh juga untuk
mempersingkat waktu. Untuk mempersingkat thickening time dapat ditambahkan
accelerator kedalam suspensi semen. Yang termasuk kedalam accelerator adalah
Calcium Chlorida, Sodium Chlorida, gypsum, Sodium Silikat, air laut dan additif
yang tergolong dispersant.
Berikut ini adalah beberapa macam dari aditif yang berpengaruh terhadap
thickening time :
Accelerator adalah additif yang dapat mempercepat proses thickening
time. Contoh aditif, antara lain:
- Calcium Chlorida, umumnya penambahan additif ini antara 2 – 4
% kedalam suspensi semen, pengaruhnya dapat mempercepat
thickening time dan menaikkan compressive strength.
- Sodium Chlorida dan NaCl, dengan kadar sampai 10 % BWOMW
berelaku sebagai accelerator.
- Gypsumi.
- Silika.
- Air laut.
Retarder adalah aditif yang dapat memperlambat proses pengerasan
suspensi semen, sehingga suspensi semen mempunyai waktu yang
cukup untuk mencapai kedalaman yang diinginkan. Contoh aditif
antara lain:
- Lignosulfonat, efektif dicampurkan kedalam suspensi semen
dengan kadar 0,1-0,15% BWOC. Lignosulfonat tetap efektif
sampai temperatur 121 ºC dan bila ditambahkan Sodium Barite
58
maka akan dapat bertahan sebagai retarder hingga temperatur 315
ºC
- CMHEC (Carboxymethyl Hydroxymethyl Cellulose), merupakan
polisakarida yang terbentuk dari kayu dan tetap stabil hingga
temperatur 121 ºC juga bila terdapat alkali pada suspensi semen
Perencanaan besarnya thickening time tergantung pada kedalaman sumur
dan waktu untuk mencapai daerah target yang akan disemen. Dilaboratorium,
pengukuran thickening time menggunakan alat High Pressure High Temperatur
(HPHT) disimulasikan pada kondisi temperatur sampai 220 ºF, BHT 500 ºF dan
tekanan sirkulasi 2500 psi. Thickening time suspensi semen dibaca apabila pada
alat tes telah menunjukkan 100 UC untuk standar API, namun ada perusahaan lain
yang menggunakan angka 70 UC (seperti pada Hudbay) dengan pertimbangan
faktor keselamatan, kemudian diekstrapolasi ke 100 UC.
Perhitungan konsistensi suspensi semen dilaboratorium ini dilakukan
dengan mengisi sampel kedalam silinder, lalu diputar konstan pada 150 rpm
kemudian dibaca harga torsinya. Dan harga konsistensi suspensi semen dapat
T 78,2
dihitung dengan menggunakan rumus Bc
20,02
59
Atmospheric consistometer vicat apparatus timbangan digital
60
5. Paddel yang telah dilapisi grease dipasang pada lid, kemudian
memasang lid yang telah terpasang paddel pada slurry container dan
dimasukkan kedalam atmospheric consistometer.
6. Menghidupkan motor dan stopwatch dan baca skala penunjuk dalam
5 menit selama 50 menit, mencatat skala pada 50 menit.
61
3.5 Hasil Pengamatan
Tabel 3.2. Data Hasil Pengamatan Pengujian Initial & Final Setting Time
62
3.6 Perhitungan
Konfersikan satuan berikut:
Diketahui 140 F
Ditanyakan: K.C.R.R
menjawab:
C = 140F? ?
= 5/9 (140-32) C
= 5/9 (108)
= 59.99C
140 f = K =? ?
= 59.99C = K
= 59.99 273 K
= 333.K
140F = R
= 4/5 x59.99 C
= 48R
140 F = R
R = F 460
= 140 460
= 600 Rankine
63
3.7 Pembahasan
Operasi pengeboran merupan hal yang tidak dapat pisahka kegiatan
exspoitasi minyak , gas dan panas bumi baik exsploiasi .
. Operasi penyemenan terhadap sumur minyak atau gas panas bumi , yang
diharapkan dapat menghasilkan suatu kondisi dimana casing di semen lubang bor
dapat berfugsi sebagaimana yang diharapkan . Proses penyemenan sendiri dapat
dibagi menjadi beberapa tahap dari pembuatan dan Slury semen , proses
pemompaan semen untuk menunggu mengerig ( tunggu semen )
Salah satu parameter yang harus dilakulan dalam prosa memompa semen adalah
lamanya waktu mereka dapat dipompa atau ( thakineing Time_ ) . Dimana waktu
penebalan tidak boleh melebihi lamanya proses memompa semen , karena jika
memompa semen mengeras sebelum selesai waktu akan menghambat proses
bahkan menghentika cementing , idealan setelah semen telah dipompa diharapkan
mengering sepenuhnya, namun realitas di lapangan sangat sulit Mencapai kondisi
ideal ini .
Satuaan yang kita gunakan dalam tes ini adalah Uc (unit konsistensi ) , sedangkan
pengujian laboratorium untuk mengetahui kapan alat mengeras atas dan bawah
yang menggunakan aparat Vicat , jika jarum telah terjebak sedalam 5 mm maka
pengaturan waktu niali telah tercapai.
64
3.8 Kesimpulan
Dari berbagai pembahasan sebelumnya, maka didapat pembahasan sebagai
berikut :
3.10 Tugas
Jawab :
Thickening time disebut dengan pumpbility karena konsistensi
semen sangat mempengaruhi proses pemompaan. Pumpbility merupakan
kemampuan pompa untuk memompakan suspensi semen. Kemampuan
pompa suspensi semen adalah 100 UC, jika melebihi 100 UC dan pompa
dipaksakan untuk memompa semen, maka pompa dapat rusak karena
melebihi beban maksimal pompa tersebut.
2. Diketahui :
Skala pada t 40 = 34 UC
Konsistensi = 100 UC
Waktu (t) = 40 Menit
65
Ditanya : waktu (t) pada saat konsistensi 100 UC dalam jam ?
Jawab :
𝑈𝐶𝑚𝑎𝑥
𝑋=( )×𝑡
𝑈𝐶𝑡
100
= ( 34 ) × 40
= 117,64 𝑀𝑒𝑛𝑖𝑡
= 1 𝐽𝑎𝑚 57,64 𝑀𝑒𝑛𝑖𝑡
66
EXPERIMENT III
EXAMINATION OF CEMENT SUSPENSION THICKENING TIME,
INITIAL & FINAL SETTING TIME
67
1) In shallow wells required thickening time is not too long , because in
addition to the target to be achieved is not too much also to shorten the
time . To shorten the thickening time can be added into the suspension of
cement accelerator . Included in the accelerator is calcium chloride ,
sodium chloride , gypsum , Sodium Silicate , sea water and dispersant
additives belonging .
2) The following are some of the kinds of additives that affect the thickening
time :
• Accelerator is additive that can speed up the process of thickening
time . Examples of additives , among others :
- Calcium chloride , addition of additives is generally between 2-
4 % suspension into the cement , the effect can accelerate the
thickening time and compressive strength increase.
- Sodium chloride and sodium chloride , with levels up to 10 %
BWOMW berelaku as accelerator.
- Gypsum.
- Silica.
- Seawater.
• Retarder are additives that can slow down the process of
hardening cement suspension , so the suspension of cement have
enough time to reach the desired depth . Examples of additives
include:
- Lignosulfonate , effectively mixed into the cement suspension
with 0.1-0.15 % levels BWOC . Lignosulfonate remain effective
until the temperature of 121 º C and when added Sodium Barite
it will be able to survive as a retarder until the temperature of
315 º C.
- CMHEC ( Carboxymethyl Cellulose Hydroxymethyl ) , is a
polysaccharide that is formed of wood and remained stable
until the temperature of 121 º C , if there is alkali in cement
suspension.
68
Planning thickening amount of time depends on the depth of the well and the
time to reach the target area to be cemented . Laboratory , thickening time
measurements using a High Pressure High Temperature ( HPHT ) conditions
simulated at temperatures up to 220 º F , 500 º F BHT and pressure of 2500 psi
circulation . Thickening time is read when the cement suspension assay has shown
100 uC for standard APIs , but there are other companies that use the figures 70
uC ( as in Hudbay ) with consideration of the safety factor , then extrapolated to
100 UC .
Calculation laboratory cement suspension consistency is done by filling the
sample into the cylinder , then rotated at 150 rpm constant prices then read
torque . And the price of cement suspension consistency can be calculated using
the formula.
69
2 . Setting up the equipment and stopwatch , prior to first calibrate the
testing equipment to be used .
3 . Turning the master switch and set the temperature at the desired
scale .
4 . Suspension pour cement into a slurry container to a height which is
indicated by the line .
5 . Paddel that has been coated with grease mounted on the lid , then put
the lid has been installed paddel the slurry container and put into
atmospheric consistometer .
6 . Turn on the motor and a stopwatch and read the scale pointer within
5 minutes for 50 minutes , noting the scale at 50 minutes .
70
3.5 Result of Observation
Table 3.1 . Data Thickening Time Test Observations
Table 3.2 . Data Observations Initial Testing & Final Setting Time
No Activity Observations
71
3.6 Calculation
Unknown 140 F
Asked : K.C.R.R
answered :
C = 140F ? ?
= 5/9 ( 140-32 ) C
= 5/9 ( 108 )
= 59.99C
140 f =K = ? ?
= 59.99C = K
= 59.99 +273 K
= 333.K
140F = R?
140 f = 59.9 C so
= 4/5 x59.99 C
= 48R
72
140 F = R
R = F +460
= 140 +460
= 600 Rankine
3.6 Discussion
Therefore, to overcome the above problems can we add into the addictive
Cement , either with accelerator to speed up the hardening Prosses , Nor other
addicteve to slow drying
73
Satuaan that we use in this test is Uc ( unit consistency ) , while laboratory testing
to find out when the top and bottom hardened appliance that is using the Vicat
apparatus , if the needle has been stuck deep as 5 mm then niali setting time has
been reached .
1.8 onclusion
a. Suspesi cement from a cement we can adjust what we use , we can adjust the
thickening of his time to the needs of our wells , and also with the help of
accelator or substance retender in suspense cement
c. wells in the shallow wells that do not need thickening terlalau long time ,
because in addition to the target to be achieved is not too much to shorten the
time , buffer time to mempersingkan thickenin
74