PEMANCANGAN Material
START
B. PELAKSANAAN
09. Penyambungan spun pile PREPARATION
C H EC K POSITION NO
(FL ATN ESS & VER TIC AL L ITY)
In accordance with coordinates X, Y, Z
The slope of the pile before piling a
Weld Wire Type E 6013 dan E7016
OK maximum of 1/250 poles in length
and / or shifting 5 cm per segment diameter 3,2 mm dan diameter 4 mm = RB
T he slope of the maximum pile is 1/75
WELDING PROCESS IN THE ROOT PASS
the length of the pole and / or shifts 75 mm 26 dan LB 52
CLEANING THE RESULT OF WELD
NO
C H EC K R ESU LT
Coating material : Zinc Chromate
Performed by the NDT (Non Destructive Test)
OK method using X-rays
There are no circular cracks and
FINISH hair cracks at the pile weld joints.
METODE 33 Days
PEMANCANGAN
B. PELAKSANAAN
09. Penyambungan spun pile dengan metode pengelasan
Peralatan
Welding Machine dengan kapasitas 400 A
Portable Dryer
• Perlu dilakukan
Test Bending