for
Lube Oil Analysis
Sampling Location
• Sampling point di Engine
• Sampling point di Compressor
• Sampling point di Turbine
• Sampling point di Gearbox
• Sampling point di Hydraulic
• Sampling Frequency
LABORATORIUM
PETROLAB
Lube Oil Sample Criteria
LABORATORIUM
PETROLAB
Sampling Hardware and Apparatus
LABORATORIUM
PETROLAB
Sampling Port dan Sampling Probe
Source: Lubrigard
LABORATORIUM
PETROLAB
Valve Mount dan Pitot Tube
Source: NORIA
LABORATORIUM
PETROLAB
Oil Vampire Pump
LABORATORIUM
PETROLAB
Lokasi Primary dan Secondary Sampling Point
Do
• Sampling from the most turbulence zones
• Sample downstream of the equipment after it
has completed its primary function
• Sample during typical operating condition, on
the run, and under normal application.
• Flushing before take the main sample
Don’t
• Sample on the dead end (no circulating
condition)
• Sample after filter / separators
• Sample when the machine is cold
• Sample from laminar flow zones
Source: NORIA
LABORATORIUM
PETROLAB
Lokasi Primary dan Secondary Sampling Point (Cont’d)
Jika tidak terdapat return line, maka Primary sample diambil dari lokasi
“after pump and before filter”
Source: NORIA
LABORATORIUM
PETROLAB
Sampling Location on Pressurized Line
Source: NORIA
LABORATORIUM
PETROLAB
Sampling Location for Multiple Gear Units
RECOMMENDED
Source: NORIA
LABORATORIUM
PETROLAB
Alternate Type to Line Sampling
Sample Trap
Dapat meningkatkan turbulensi, namun system ini hanya
cocok untuk low pressure / gravity force system.
Tidak direkomendasikan untuk high pressure system
Source: NORIA
LABORATORIUM
PETROLAB
Drain Port Sampling
LABORATORIUM
PETROLAB
Vampire Pump Technique
LABORATORIUM
PETROLAB
Sampling yang SALAH (Garbage Data)
LABORATORIUM
PETROLAB
Sampling Frequency EQUIPMENT TYPE Sampling Frequency
(kami mohon maaf jika dalam presentasi maupun slide terdapat kesalahan)