Kaedah kerja
Peralatan yang Data-data sedia Maklumat data-
yang akan
akan digunakan ada data pengukuran
digunakan
Aspek
keselamatan
• Dapatkan gambaran
Lokasi kasar kedudukan
kawasan stesen kawalan
kerja pesisir & bentuk
garis peruman
Sempadan
kawasan
kerja
• Bantu tetapkan
Skala jarak sela garis
pelan akhir peruman, titik fiks &
titik kedalaman
Kaedah &
Budget
Kualiti Kerja
Keperluan Kaedah
logistik penentududukan
Keperluan Kaedah
kakitangan pungutan data
Sela fiks /
kedalaman
Halaju bot
sepanjang
garis peruman
Kaedah capai
liputan dasar
laut yang
dikehendaki
Garis peruman perlu dirancang bagi capai liputan dasar laut yang
memuaskan & ekonomi yang minimum
Dibahagi pada 3 bentuk: Faktor pengaruhi pemilihan bentuk garis
Selari lurus peruman:
Selari bulat Lokasi kawasan kerja
Radiasi Peralatan penentududukan
Kedudukan stesen kawalan
12 22 32 38 19
42
38 7 12
56
13 23 33 37
43
55
20
8 11
14 24 34
36
44 Pulau
54 21
10
9
Bentuk garis peruman di sungai & kuala sungai adalah selari
bulat
Peralatan penentududukan sesuai adalah total station / tiodolit
Bentuk garis peruman dalam kawasan pelabuhan / jeti adalah
selari lurus & radiasi
Peralatan penentududukan sesuai adalah EPS, DGPS, total
station / tiodolit
Bentuk garis peruman bagi kawasan terbuka seperti pinggir
laut & luar pesisir
Peralatan penentududukan sesuai adalah EPS, DGPS / total
station (jika pesisir)
Ketepatan & kepadatan peruman tentukan skala pengukuran
Skala diguna sebagai rujukan bagi halaju bot, sela peruman & sela
fiks
Sela fiks adalah tetap di mana ia diambil setiap 25mm & sela garis
peruman 10mm pada skala pengukuran
Contoh:
Jika skala pengukuran = 1:10000
Sela garis peruman = 100m
Sela fiks = 250m
Pembayaran
Jenis projek yang hendak dijalankan (dredging, rock placement, revetment
construction)
Kemampuan peralatan menjalankan kerja (lead line, analog & digital echo
sounder, MBES, automated data collection)
Rock
Placement
Revetment
Construction
Sela fiks adalah tetap (25mm pada skala pengukuran)
Sela fiks ditentukan dengan jarak, sudut /masa (bergantung kaedah penentududukan)
Jika titik fiks diplot & disambungkan, garis adalah mewakili laluan bot atau plot jejak
Kertas ekogram
Halaju bot ditentukan oleh:
Keselamatan navigasi
Sela fiks
Frekuensi ulangan denyut bagi pemerum gema
(isyarat dihantar & diterima semula pada titik yang
sama)
Keadaan laut
Halaju bot mesti seragam semasa fixing
Convertion factors: knots to km per hour multiply by 1.852
Kontur kedalaman perlu
digambarkan setepat
yang boleh
Boleh dicapai dengan
arah garis perum
bersilang dengan arah
kontur & pada sudut
tegak
Bagi penuhi keperluan ketepatan kawasan yang
diukur secara sistematik, IHO perkenalkan 4 arahan
(order) yang diterbitkan melalui S-44 edisi 98, iaitu:
Special order survey
Order 1 survey
Order 2 survey
Order 3 survey
ORDER Special 1 2 3
Harbours, harbour
Harbours, berthing
approach channels, Areas not described Offshore areas not
areas, and associated
Examples of recommended tracks in Special Order and described in Special
critical channels with
Typical Areas and some coastal Order 1, or areas up Order, and Orders 1
minimum under keel
areas with depths up to 200 m water depth and 2
clearances
to 100m
Horizontal
Accuracy (95% 2m 5 m + 5% of depth 20 m + 5% of depth 150 m + 5% of depth
Confidence Level)
Depth Accuracy
for Reduced a = 0.25 m a = 0.5 m a = 0.1.0 m
Same as Order 2
Depths (95% b = 0.0075 b = 0.013 b = 0.023
Confidence Level)
100% Bottom Required in selected May be required in
Compulsory Not applicable
Search areas selected areas
Cubic features > 2 m
System
in depths up to 40 m;
Detection Cubic features > 1 m Same as Order 1 Not applicable
10% of depth beyond
Capability
40 m
3 x average depth or 3-4 x average depth
Maximum Line Not applicable, as
25 m, whichever is or 200 m, whichever is 4 x average depth
spacing 100% search compulsory
greater great
To calculate the error limits for depth accuracy the corresponding values of ‘a’ and ‘b’ listed
in table have to be introduced into the formula :
± √ [a2 +(b*d)2]
a constant depth error, i.e. the sum of all constant errors
b*d depth dependent error, i.e. the sum of all depth dependent errors
b factor of depth dependent error
d depth
The rows of table are explained as follows:
• Row 1 gives examples of areas to which an order of survey might typically be applied
• Row 2 lists positioning accuracies to be achieved to meet each order of survey
• Row 3 specifies parameters to be used to calculate accuracies of reduced depths to be
achieved to meet each order of survey
• Row 4 specifies occasions when full bottom search should be conducted
• Row 5 specifies the detection capabilities of systems used for bottom search
• Row 6 is to be interpreted as
spacing of sounding lines for single beam sounders, and
distance between the outer limits of swaths for swath sounding systems