tegangan sinyal
SNR 20 log dB
tegangan noise
NOISE FAKTOR dan NOISE FIGURE
Si/Ni So/No
peralatan
NOISE FACTOR(F)=[(Si/Ni)/(So/No)]
SNRi
NF 10 log dB
SNRo
(Vsi/Vni)
NF 20 log dB
(Vso/Vno)
1. The input signal to a telecommunication
receiver consist of 100 W of signal power
and 1 W of noise power. The receiver
contributes an additional 80 W of noise, NR,
and has a power gain of 20 dB. Compute the
input SNR, the output SNR and the receivers
noise figure.
2. A log amplifier is specified as having a noise
figure of 3.9 dB. For an input signal of 65 W ,
the amplifier produces an output power of 20
mW. If the noise out of the amplifier is
measured to be 1 mW, compute the following:
a. The power gain (Ap)
b. The power gain in decibels, Ap (dB)
c. The noise factor, F
d. The input noise to the log amplifier, Ni
e. The noise contributed by the log amplifier, Na