Dokumen
PT. KORINDO KONSTRUKSI Document No.
QP-8.2
Tanggal Revisi
28-May-2021
Revision Date
No. Revisi
PENGENDALIAN KETIDAKSESUAIAN Revision No.
1
CONTROL OF NON-CONFORMING Halaman
No. Page 1 Of 6
PENGESAHAN
APPROVAL
Ditinjau:
Reviewed
Disetujui:
Approved
Disiapkan:
Prepared
Revision History :
Revision No. Page Description
0 Issued for Bidding
No. Dokumen
PT. KORINDO KONSTRUKSI Document No.
QP-8.2
Tanggal Revisi
28-May-2021
Revisi Date
No. Revisi
PENGENDALIAN KETIDAKSESUAIAN Revision No.
1
CONTROL OF NON-CONFORMING Halaman
No. Page
2 of 6
1. TUJUAN 1. PURPOSE
Prosedur ini untuk menjamin agar produk This procedure to guarantee that non-
yang tidak sesuai dengan spesifikasi tidak conforming product to the specification is not
diproses lebih lanjut atau tidak diserahkan further processed or delivered to the
customer. Follow-up to product including
kepada pemesannya. Tindak lanjut untuk
Rework, Use as is, Repair and Reject with
produk meliputi dikerjakan ulang, digunakan understand to risk and opportunity aspect.
apa adanya, diperbaiki atau ditolak dengan
memperhatikan aspek resiko dan peluang
yang ada.
MIIR = Material Incoming Inspection Record MIIR = Material Incoming Inspection Record
4. REFERENSI 4. REFERENCE
5. PROSEDUR 5. PROCEDURE
5.1 DEFINISI PROSES 5.1 DEFINITION PROCESS
NCR bisa dikeluarkan oleh departemen NCR can be issued in every process of
manapun dan harus diproses sesuai making section, therefore checking during
process need to be done.
dengan prosedur ini,
Non-conforming identification
Identifikasi Ketidak Sesuaian
No. Dokumen
PT. KORINDO KONSTRUKSI Document No.
QP-8.2
Tanggal Revisi
28-May-2021
Revisi Date
No. Revisi
PENGENDALIAN KETIDAKSESUAIAN Revision No.
1
CONTROL OF NON-CONFORMING Halaman
No. Page
3 of 6
Inspektur QC membuat NC (Doc. No. QR- QC Inspector makes the NC (Doc. No.
8.2.1) dan melaporkan ketidaksesuaian QR-8.2.1) and reporting to QC manager
pada manajer QC dan kemudian and then QC Supervisor will make NCR.
Supervisor QC membuat NCR.
Untuk mengisi status NCR (Doc. No. QR- For filling NCR (Doc. No. QR-8.2.2)
8.2.2), manajer QC harus status, QC manager must coordinate with
mengkoordinasikan kepada Departemen Engineering Department and Production
Teknisi dan Departemen Produksi, Department, discuss about the solution
membahas masalah jalan keluar dari for this non-conformity
ketidaksesuaian tersebut.
Jalan keluar tersebut kemungkinan akan The way out is likely there will be follow-
ada tindak lanjut, meliputi : up, including:
Dikerjakan Ulang Rework
Digunakan apa adanya Use as is
Diperbaiki Repair
Ditolak Reject
Untuk material yang dikerjakan ulang dan Rework and repair material did by
diperbaiki dilakukan oleh departemen production department in accordance with
produksi sesuai dengan prosedur Production Procedure, Doc. No. : QP-7.2
produksi , No. Dok. :QP-7.2 dan welder and Welder Qualified List and WPS
qualified list serta Prosedur WPS. Procedure.
Close out tersebut akan diketahui dan Close-out will be known to and signed the
ditanda tangani AI dan pelanggan bila AI and the customer when necessary,
when NCR was not Rejecting
diperlukan, apabila NCR tersebut tidak
Reject.
No. Dokumen
PT. KORINDO KONSTRUKSI Document No.
QP-8.2
Tanggal Revisi
28-May-2021
Revisi Date
No. Revisi
PENGENDALIAN KETIDAKSESUAIAN Revision No.
1
CONTROL OF NON-CONFORMING Halaman
No. Page
5 of 6
6. LAMPIRAN 6. ATTACHMENT