TRANSMISSION /TRANSMISI
PRE F O R M E D L I NE P R ODU C TS
Dulmison Indonesia established in 1995, became subsidiary of Preformed PT Dulmison Indonesia didirikan pada tahun 1995, kemudian menjadi bagian
Line Products at the end of 2009. Located in Cikarang, Bekasi, West Java, dari anak perusahaan Preformed Line Products pada akhir tahun 2009.
Indonesia, with more than 400 employees, the 9850m 2 factory is Bertempat di Cikarang, Bekasi, Jawa Barat, Indonesia, dengan lebih dari 400
a major supplier of a wide range of fittings and accessories for pegawai, pabrik seluas 9850m2 ini merupakan penyedia utama rangkaian
overhead transmission, distribution and substation lines and associated produk fitting dan aksesori untuk jaringan Saluran Udara Tegangan Tinggi,
communications infrastructure, solar, and rack system enclosures, serving Distribusi dan Gardu Induk dan infrastruktur komunikasi yang terkait, solar,
customers in Indonesia and around the world. dan rak, melayani pelanggan di Indonesia dan di seluruh dunia.
The ISO9001:2015, ISO14001:2015, and SMK3 (similar to OHSAS18001) Pabrik yang tersertifikasi ISO9001:2015, ISO14001:2015, dan SMK3 (sama
certified facility manufactures products that are based on a specialized dengan OHSAS18001) memproduksi produk-produk yang berbasis pada
capability in formed wire and cast aluminium products and include specialist kemampuan khusus di bidang pembentukan kawat dan mencetak
vibration control equipment, such as Dogbone Vibration Dampers, Spacer produk-produk aluminium dan juga termasuk peralatan kontrol getaran,
Dampers and Armor Grip Support Units, as well as a wide range of helical seperti Dogbone Vibration Damper, Spacer Damper dan Armor Grip Support
wire products. For the communications infrastructure, a complete range of Unit, juga merupakan penghasil beragam produk kawat helikal. Untuk
OPGW and ADSS cable fittings and accessories, as well as fiber optic splice infrastruktur di bidang komunikasi, tersedia rangkaian produk kawat fitting
closures, are also manufactured and supplied. dan aksesoris untuk OPGW dan ADSS, juga memproduksi dan menyediakan
rak splice serat optik.
Preformed Line Products (PLP) Indonesia is an approved supplier to many Preformed Line Products (PLP) Indonesia merupakan perusahaan yang
power utilities around the world including PLN (Indonesia), NGT (UK), EGAT sudah di akui sebagai penyedia produk ke banyak perusahaan listrik di
(Thailand), TNB (Malaysia), Transgrid (Australia), ETSA Utilities (Australia), seluruh dunia termasuk PLN (Indonesia), NGT (Inggris), EGAT (Thailand),
Western Power (Australia), WAPDA (Pakistan), MERALCO (Philippines), TNB (Malaysia), Transgrid (Australia), ETSA utility (Australia),
NGCP (Philippines), SEB (Malaysia). Western Power (Australia), WAPDA (Pakistan), MERALCO (Philippines),
NGCP (Philippines), SEB (Malaysia).
ST R I N G S E T
PLP offers various type of string set including Suspension, Tension, Inverse PLP menawarkan beragam tipe string set meliputi Suspension, Tension,
Tension and Jumper Suspension with a variety of bundle insulator for many Inverse Tension dan Jumper Suspension dengan beragam kombinasi
type and number of bundle conductors according to the specification of high bundle insulator untuk beragam jenis dan jumlah bundle konduktor sesuai
and extra high voltage applications up to 500kV. spesifikasi pada Jaringan Saluran Udara Tegangan Tinggi dan Ekstra Tinggi
hingga 500kV.
Double Tension
2x Conductor
www.preformed.com
String Sets for High Voltage Applications 500kV
F I T T I N G AC C E SS ORIE S
SUSPENSION
The economic option is Trunnion Suspension Clamp with Armor Rods.
Armor Rods are intended to provide minimum protection for conductors
against friction with suspension and bending at support point.
Selain tipe Compression, PLP juga memproduksi Dead End, Splice (Midspan
Joint) dan Repair Sleeve jenis Helical. Jenis Helical ini sangat mudah
dipasang tanpa perlu menggunakan alat.
F I T T I N G AC C E SS ORIE S
SPACER DAMPER
PLP manufacturing many size and type of spacer dampers (Bolted, Helical, PLP memproduksi beragam ukuran dan tipe Spacer Damper (Bolted, Helical,
Cushion-Grip), and conductor configurations for Twin, Triple, Quad and Cushion-Grip) dan konfigurasi conductor untuk Twin, Triple, Quad dan
to Hex bundles. sampai Hex bundle.
There is an element of Elastomer insert material made of high-quality rubber, Terdapat element material Elastomer insert yang terbuat dari rubber
which been designed to absorb maximum energy and to protect conductors berkualitas tinggi, yang di desain untuk menyerap energi maksimum dan
and other hardware. The design provides full resistance for conductor untuk melindungi konduktor dan hardware lainnya. Spacer Damper di desain
against vibration and eliminates additional vibration damper such as agar dapat memberikan daya tahan sepenuhnya pada konduktor terhadap
Dogbone Vibration Damper. getaran dan menghilangkan penambahan vibration damper seperti Dogbone
Vibration Damper.
VIBRATION DAMPER
Vibration Dampers (Dogbone) Vibration Dampers (Dogbone)
The Aeolian vibration causes Dogbone weights to move in the opposite Getaran Aeolian menyebabkan pemberat-pemberat Dogbone bergerak ke
direction of the cable vibration. The opposite movements produce energy arah yang berlawanan dengan arah getaran kabel. Pergerakan yang berbeda
which then absorbed by the messenger wire on messenger cable. That arah ini menghasilkan energi yang kemudian di serap oleh kawat messenger
energy will be dissipated to the air in the form of heat. pada kabel messenger. Kemudian energi tersebut akan terbuang ke udara
dalam bentuk energi panas.
PLP Spiral Vibration Dampers are also effective on certain size overhead PLP Spiral Vibration Dampers juga efektif di gunakan pada beberapa ukuran
shield wires and OPGW. While for damper applications on ADSS cable, refer kabel pelindung overhead dan OPGW tertentu sedangkan untuk aplikasi
to the FIBERLIGN® Fiber Optic Products. Consult PLP for specifics. peredam pada kabel ADS, lihat referensi produk FIBERLIGN® Fiber Optic.
Konsutasikan ke PLP untuk lebih jelasnya.
www.preformed.com
F I T T I N G AC C E S S ORIE S FOR OP GW / AD SS
Suspension
PLP Heliformed Suspension Unit (HSU) provides better protection for the
cable and fiber optic on the support point. Combination structures of
reinforced rods, outer rods, housing and high quality rubber inserts, effectively
reduced compression, clamping and bending stresses. There are Left Hand
Lay and Right Hand Lay type which is fitted accordingly to the hand lay
structure of the OPGW cable.
It consists of dual rods (Reinforced rods and helical dead end), extension link
dan pole attachment fitting. The Reinforced Rods structure have a function
to protect cables from compression Dead End Clamp (Helical Dead End)
pressures and with the extension link component its serve to expand the
radius bending.
Terdiri dari dual rods (reinforced rods dan helical dead end), extension link
dan fitting yang menempel di tiang. Struktur Reinforced Rods berfungsi
melindungi kabel dari tekanan kompresi Dead End Clamp (Helical Dead End)
dan adanya komponen extension link berfungsi untuk menambah radius
bending.
Joint Box
PLP Joint Box can be use for either ADSS or OPGW made of Stainless
Steel IP65 material – a corrosion resistant and air and watertight sealed.
Standard size Splice Case accommodates up to four 36-count Splice Trays
(144 max. splice capacity). It has bracket mounting that can be use on either
wooden, concrete or steel poles.
PLP Joint Box dapat dipergunakan baik untuk ADSS atau OPGW terbuat
dari material Stainless Steel IP65 – anti korosi dan lapisan kedap udara dan
air. Splice Case ukuran standard-nya dapat memuat sampai empat 36-count
Splice Tray (maksimum 144 kapasitas splice). Produk tersebut mempunyai
bracket mounting yang dapat di gunakan baik pada tiang kayu, beton
maupun besi.
www.preformed.com
THERMOLIGN ® Products for High Temperature Low Sag Conductor (HTLS).
PLP has been involved with the design, testing and production of hardware PLP telah ikut serta dalam proses desain, testing dan memproduksi
and accessories for High Temperature Low Sag Conductors (HTLS) since hardware dan aksesoris untuk High Temperature Low Sag Conductors
1999. PLP registered the brand name THERMOLIGN to represent products (HTLS) sejak tahun 1999. PLP mendaftarkan hak cipta untuk merek produk
that are intended for use on new HTLS conductor technologies that have THERMOLIGN yang di tujukan untuk di gunakan pada konduktor
maximum continuous operating temperatures ranging from 180°C to 250°C. HTLS dengan teknologi yang terbaru yang mempunyai suhu maksimum
pengoperasian secara terus menerus di antara 180°C sampai 250°C.
THERMOLIGN products have been designed and thoroughly tested both in Produk-produk THERMOLIGN telah di desain dan di uji coba secara
the laboratory and in the field to meet the unique requirements of high keseluruhan baik di laboratorium dan juga di lapangan secara langsung
temperature operation while still providing a service life of 40 to 50 years. untuk memenuhi persyaratan unik dari pengoperasian pada suhu tinggi
sementara itu juga tetap menyediakan life service 40 sampai 50 tahun.
THERMOLIGN® Suspension
The THERMOLIGN® Suspension is specifically designed for applications on
Aluminium based high temperature conductors that will be operated at
continuous temperatures ABOVE 200°C, and features:
THERMOLIGN® Dead-end
The THERMOLIGN® Dead-end is specifically designed for application on
ACSS/AW or ACCR (not intended for use on conductors with trapezoidal
outer strands). The design allows for continuous conductor operating
temperatures up to 250°C.
PLP products have also been certified by PT PLN PUSLITBANG. Produk-produk PLP sudah di sertifikasi oleh PT PLN PUSLITBANG.
Contact PLP for more information. Hubungi PLP untuk informasi lainnya.