CASE:
We have a stream containing 15%mol ethane, 20%mol propane,
60%mol i-butane and 5%mol n-butane at 50 0F and atmospheric
pressure, and a flowrate of 100 lbmol/hr. This stream is to be
compressed to 50 psia, and then cooled to 32 0F. The resulting vapor
and liquid are to be separated as the two product streams. What are
the flowrates and compositions of these two streams?
FLASH SEPARATOR
Pertama kali, buatlah material stream 1 dengan kondisi
1. T = 50 0F
2. P = 1 atm
3. Flowrate = 100 lbmol/hr
4. Composition (fraksi mol) = 15% ethane, 20% propane, 60% i-butane and 5% n-butane
FLASH SEPARATOR
Tambahkan compressor dengan outlet pressure 50 psia (material stream 2)
FLASH SEPARATOR
Material stream 2 didinginkan dengan cooler hingga 32 0F (material stream 3)
FLASH SEPARATOR
Terlihat bahwa material stream 3 terdiri dari fase vapor dan liquid. Tambahkan SEPARATOR
pada stream 3 tersebut untuk memisahkan fase vapor dan liquid.
FLASH SEPARATOR
Sambungkan stream 3, stream 4 (vapor outlet) dan stream 5 (liquid outlet)
FLASH SEPARATOR
Hasil simulasi dari CASE kali ini adalah sebagai berikut:
TUGAS !!!
Materi terkait Simulasi Proses menggunakan piranti lunak Aspen Hysys dapat diunduh di link berikut:
https://intip.in/MateriSimulasiUPNVJT
KOLOM SEPARASI
Hysys dapat digunakan untuk pemodelan pada berbagai konfigurasi kolom. Misalnya, pada permodelan
plant pemrosesan gas alam :
• De-Ethanizer (Distillation Column)
• De-Propanizer (Distillation Column)
Dasar Simulasi :
1. Mulai dengan new case
2. Pilih Peng Robinson EOS
3. Tambahkan N2, CO2, C1-C4
4. Masuk ke Simulation Environment.
Sebelum menggunakan Distillation Column, harus sudah menentukan estimasi awal unuk jenis kolom
sederhana, yaitu menggunakan Shortcut Column.
Terdapat 2 cara untuk membuat Shortcut Column untuk simulasi:
1. Memilih Flowsheet | Add Operation command from pada menu bar. Kemudian tampil Unit Ops property
view.
Dapat pula mengakses Unit Ops property view dengan menenkan tombol F12.
2. Memilih Short Cut Columns radio button.
KOLOM SEPARASI
Add the Feed Streams with following data
Pada Reflux Ratios group, perhitungan refluks rasio minimum tampak satu aliran yang melampirkan Connections page,
dan dibutuhkan parameter yang spesifik pada Components group and Pressures group.
Rating Tab
Saat ini tidak dapat memberikan tingkat informasi untuk Shortcut Column.
Worksheet Tab
Worksheet tab menampilkan ringkasan dari informasi yang terkandung dalam
tampilan properti stream untuk semua aliran pada operasi.
KOLOM SEPARASI
Tampilan untuk Shortcut Column calculations.
KOLOM SEPARASI
Column Result Description
Minimum Number of The Fenske minimum number of trays, which is not affected
Trays by the external reflux ratio specification.
Actual Number of Trays Calculated using the Gilliland method.
Optimal Feed Stage Top down feed stage for optimal separation.
Condenser and Reboiler Temperatures These temperatures are not affected by the external reflux
ratio specification.
Rectifying Section Vapour and Liquid The estimated average flow rates above the feed location.
traffic flow rates
Stripping Section Vapour and Liquid The estimated average flow rates below the feed location.
traffic flow rates
Condenser and Reboiler Duties The duties, as calculated by HYSYS.
KOLOM SEPARASI
Dynamics Tab
Shortcut Column hanya tersedia dalam mode steady state. Dengan demikian, tidak ada informasi yang tersedia di tab
Dynamics
Reboiled
Absorber
Refluxed
Absorber
Distillation
KOLOM SEPARASI
Hysys dapat digunakan untuk pemodelan konfigurasi kolom yang luas. Pada simulasi ini, beberapa unit plant pemrosesan
gas alam akan dilakukan:
• De-Ethanizer (Distillation Column)
• De-Propanizer (Distillation Column)
Dasar Simulasi :
1. Mulai dengan new case
2. Pilih Peng Robinson EOS
3. Tambahkan N2, CO2, C1-C4
4. Masuk ke Simulation Environment.
KOLOM SEPARASI
Double-click pada Distillation Column di Objective Palette dan masukkan informasi berdasarkan Shortcut Column.
27
KOLOM SEPARASI
Step 2
Step 3
28
KOLOM SEPARASI
Step 4
Step 5
29
KOLOM SEPARASI
Monitor page terutama digunakan untuk mengedit spesifikasi, pemantauan konvergensi
Monitor Page kolom, dan melihat plot profil Column. Tampilan awal dapat diestimasikan dan diakses
dari halaman ini.
KOLOM SEPARASI
Untuk membuat Column Distillation convergence, maka kita harus menambahkan spesifikasi – spesifikasi pada
Monitor Tab, estimasi data yang digunakan dapat diperoleh dari Shortcut Column
The default specifications for the four basic column templates are combinations of the
following:
• Overhead vapour flowrate
• Distillate flowrate
• Bottoms flowrate
• Reflux ratio
• Reflux rate
zero
KOLOM SEPARASI
Untuk membuat Column Distillation convergence, maka kita harus menambahkan spesifikasi – sprsifikasi pada
Monitor Tab, estimasi data yang digunakan dapat diperoleh dari Shortcut Column
The default specifications for the four basic column templates are combinations of the following:
• Overhead vapour flowrate
• Distillate flowrate
• Bottoms flowrate
• Reflux ratio
• Reflux rate
Pada halaman Spec, pilih tombol Add untuk menentukan spesifikasi yang baru
pilih Column Duty sebagai tipe spesifikasi dan menentukan informasi
KOLOM SEPARASI
Klik tombol Run pada kolom
zero
KOLOM SEPARASI
Adding a Valve
valve digunakan untuk mengurangi tekanan aliran DC2 Btm sebelum masuk ke kolom akhir, De-Propanizer. menambahkan
valve operation dan memberikan informasi.
In this cell… Enter…
Connections
Feed Stream Bottom LO
Product Stream DC3 Feed
Worksheet
DC3 Feed Pressure 1690 kPa (245 psia)
KOLOM SEPARASI
De-Propanizer
Double-click pada tombol Distillation Column button pada Objective Palette abd masuk mengikuti informasi berdasarkan
Shortcut Column untuk De-Propanizer
zero
TUGAS !!!
1. Di Laboratorium Operasi Teknik Kimia, sekelompok mahasiswa akan memurnikan larutan ethanol-air
20%wt pada perangkat kolom distilasi sederhana skala laboratorium. Bila larutan ethanol-air tersebut
ingin dimurnikan hingga 80%wt pada kondisi atmosferik berapa stage yang diperlukan di kolom distilasi
Coba simulasikan dengan menggunakan model UNIQUAC sebagai fluid package! Data yang lain
silahkan diasumsikan sendiri dengan logis.
2. Nama file ditulis NamaMahasiswa_NIM.
Materi terkait Simulasi Proses menggunakan piranti lunak Aspen Hysys dapat diunduh di link berikut:
https://intip.in/MateriSimulasiUPNVJT